Festplatten Ausfall

Bitte loggen sie sich ein oder registrieren sie sich.

Einloggen mit Benutzername, Passwort und Sitzungslänge
Erweiterte Suche  

Autor Thema: Festplatten Ausfall  (Gelesen 2243 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

jucker

  • Grünschnabel
  • *
  • Offline Offline
  • Beiträge: 9
Festplatten Ausfall
« am: 01.Juni 2007, 07:26:19 »

Hallo,

aktuell kein Email darum auf diesem Weg. Nach dem Tausch der einen Festplatte ist nun auch die zweite abgerauscht, siehe smart output unten. Können Sie diese auch umtauschen ?

Merci!

Server 85.31.186.8

85-31-186-8_rescue ~ # smartctl -d ata -a /dev/sdb
smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ExcelStor Technology J8160S
Serial Number:    PVB300Q407196A
Firmware Version: P22OA50U
User Capacity:    164,696,555,520 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Fri Jun  1 05:18:52 2007 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (2865) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  48) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   058   058   016    Pre-fail  Always       -       218702301
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   125   125   024    Pre-fail  Always       -       158 (Average 160)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       30
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       4
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   020    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       3186
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       30
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       162
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       162
194 Temperature_Celsius     0x0002   153   153   000    Old_age   Always       -       39 (Lifetime Min/Max 10/73)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       5
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 19 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 19 occurred at disk power-on lifetime: 3181 hours (132 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 7c 5b a3 63 ea  Error: UNC 124 sectors at LBA = 0x0a63a35b = 174302043

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 f0 e7 a0 63 e0 08   5d+08:44:20.500  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:44:15.400  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:44:10.100  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:44:05.000  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:43:59.800  READ DMA EXT

Error 18 occurred at disk power-on lifetime: 3181 hours (132 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 7c 5b a3 63 ea  Error: UNC 124 sectors at LBA = 0x0a63a35b = 174302043

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 f0 e7 a0 63 e0 08   5d+08:44:15.400  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:44:10.100  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:44:05.000  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:43:59.800  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:54.700  READ DMA EXT

Error 17 occurred at disk power-on lifetime: 3181 hours (132 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 7c 5b a3 63 ea  Error: UNC 124 sectors at LBA = 0x0a63a35b = 174302043

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 f0 e7 a0 63 e0 08   5d+08:44:10.100  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:44:05.000  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:43:59.800  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:54.700  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:49.500  READ DMA EXT

Error 16 occurred at disk power-on lifetime: 3181 hours (132 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 7c 5b a3 63 ea  Error: UNC 124 sectors at LBA = 0x0a63a35b = 174302043

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 f0 e7 a0 63 e0 08   5d+08:44:05.000  READ DMA EXT
  25 00 f0 e7 a0 63 e0 08   5d+08:43:59.800  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:54.700  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:49.500  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:44.400  READ DMA EXT

Error 15 occurred at disk power-on lifetime: 3181 hours (132 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 7c 5b a3 63 ea  Error: UNC 124 sectors at LBA = 0x0a63a35b = 174302043

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 f0 e7 a0 63 e0 08   5d+08:43:59.800  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:54.700  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:49.500  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:44.400  READ DMA EXT
  25 00 f8 df a0 63 e0 08   5d+08:43:39.000  READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Gespeichert


Forum-Support

  • Gast
Re: Festplatten Ausfall
« Antwort #1 am: 01.Juni 2007, 11:32:32 »

Hallo,


f?hren Sie bitte einen kurzen, sowie einen langen  Test durch.

smartctl -d ata --test=short /dev/sdb
smartctl -d ata --test=long /dev/sdb

Senden Sie die Ergebnisse an den Support.

Gru? Timo,

Gespeichert

White2001

  • Jungspund
  • *
  • Offline Offline
  • Geschlecht: Männlich
  • Beiträge: 163
Re: Festplatten Ausfall
« Antwort #2 am: 07.Juni 2007, 16:08:17 »

Sieht fast genauso aus wie ehemals bei mir....
Siehe Forum/Suche
Gespeichert
 

Seite erstellt in 0.087 Sekunden mit 22 Abfragen.