Hallo & Guten Morgen,
der Server (proxmix, lvm, software-raid) verhielt sich seltsam (langsam, Abstürze) - durch einen Reboot verbesserte sich das nicht.
Ich bin dann hier im Forum auf:
http://forum.euserv.de/index.php/topic,5257.msg24317.html#msg24317 gestossen & habe dann angefangen im System zu graben.
Meine Schlussfolgerung aus den angehängten Daten wäre, das die Platte sda defekt ist - da lässt sich auch kein smart-Status mehr auslesen - aus Platte b schon.
mdadm --examine --brief --scan --config=partitionsARRAY /dev/md0 UUID=1d5eaa18:3db42663:3d186b3c:53958f34
ARRAY /dev/md1 UUID=4cb3448d:eebf23d9:3d186b3c:53958f34
cat /proc/mdstatPersonalities : [raid1]
md1 : active raid1 sdb2[1]
974262464 blocks [2/1] [_U]
md0 : active raid1 sdb1[1]
499904 blocks [2/1] [_U]
unused devices: <none>
smartctl -a /dev/sdasmartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-26-pve] (local build)
Copyright (C) 2002-11 by Bruce Allen,
http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===
Device Model: ST_M13FQBL
Serial Number: QNR_BFW
Firmware Version: 03171109
User Capacity: 4,142,054,400 bytes [4.14 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Sun Jan 12 06:52:04 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Error SMART Values Read failed: scsi error aborted command
Smartctl: SMART Read Values failed.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Error SMART Error Log Read failed: scsi error aborted command
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: scsi error aborted command
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging
smartctl -a /dev/sdbsmartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-26-pve] (local build)
Copyright (C) 2002-11 by Bruce Allen,
http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDS721010DLE630
Serial Number: MSE5235V3SB42U
LU WWN Device Id: 5 000cca 37cf4e4d5
Firmware Version: MS2OA610
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Jan 12 06:53:39 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7507) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 126) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 077 077 016 Pre-fail Always - 76218460
2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 77
3 Spin_Up_Time 0x0007 107 107 024 Pre-fail Always - 214 (Average 214)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 53
5 Reallocated_Sector_Ct 0x0033 089 089 005 Pre-fail Always - 266
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 118 118 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 8061
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 53
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 231
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 231
194 Temperature_Celsius 0x0002 230 230 000 Old_age Always - 26 (Min/Max 23/37)
196 Reallocated_Event_Count 0x0032 094 094 000 Old_age Always - 281
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5535 -
# 2 Extended offline Completed without error 00% 5364 -
# 3 Extended offline Completed without error 00% 5359 -
# 4 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.