Forum EUserv

Server-Foren => Root-Server - Allgemein => Thema gestartet von: Voyeur am 11.August 2009, 18:41:12

Titel: Festplatte sehr langsam / Debian DMA-Problem
Beitrag von: Voyeur am 11.August 2009, 18:41:12: Hallo Leute!
Ich habe bei dem aktuellen Angebot zugeschlagen:

Zitat
Prozessor (CPU): AMD Sempron 2200+ oder besser
Architektur: 32Bit
Arbeitsspeicher (RAM): 1GB DDR1
Festplatte: 1x 80GB oder 160GB
Festplattentyp: ATA
Netzwerkanbindung: 1x 100Mbit/s
Bandbreite: 100Mbit/s ohne SLA
Traffic: inklusive
feste IP: 1 Stück

Mal davon abgesehen, das ich NATÜRLICH die 80GB Festplatte bekommen habe ( :( ) ist der Server nun startbereit und lauffähig.
Nun bin ich gerade dabei einen Container mit der Größe von 65GB zu verschlüsseln...
Ich gehe so vor, wie ich es auf etlichen anderen Servern (OVH, Server4You, Strato, etc...) von mir auch getan habe...

Das Verschlüsseln trudelt gerade mit 3,2MB/s vor sich her und wird so, laut Vorhersage von Truecrypt, geschlagene 5 Std. dauern...
Bei dem KLEINSTEN Isgenug von OVH dauerte es bei einer weitaus größeren Festplatte nicht länger als 30 Minuten!

Spiegelt sich hier schon die schlächtere Hardware (evtl. langsamere Festplatte...) wieder?

LG Seb.
Titel: Re: Festplatte sehr langsam?
Beitrag von: Forum-Support2 am 12.August 2009, 09:05:39: Hallo,

in der Regel sind bei den kleinen Servern PATA-Platten verbaut. Wie das andere Provider machen, wissen wir nicht. Für den Preis werden Sie (derzeit noch) selten SATA-Platten bekommen.

Wie auch immer, sollten Sie den DMA-Modus prüfen, mit dem Ihre PLatte läuft und den ggf. tunen. DMA4 sollten die Platten alle können. Es gibt dazu schon einige Threads hier im Forum.

viele Grüße,
Thomas
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 12.August 2009, 14:10:30: Könntest du mir erklären wie ich genau vorgehen muss um den maximalen Datendurchsatz zu erlangen?

Als Betriebssystem habe ich Debian installiert

LG Seb.
Titel: Re: Festplatte sehr langsam?
Beitrag von: uname am 12.August 2009, 16:32:42: Installiere erst mal hdparm

Code: [Auswählen]
apt-get install hdparm
und dann mach

Code: [Auswählen]
hdparm /dev/??? hdparm -tT /dev/???
Bitte Ausgaben posten. Die Fragezeichen durch das Device ersetzen, bekommst du z.B. mit "df -h".
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 12.August 2009, 16:51:20: Zitat von: uname am 12.August 2009, 16:32:42
Code: [Auswählen]
hdparm /dev/???
/dev/hda2:
multcount = 0 (off)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 16383/255/63, sectors = 152578831, start = 3722657

Zitat von: uname am 12.August 2009, 16:32:42
Code: [Auswählen]
hdparm -tT /dev/???
/dev/hda2:
Timing cached reads: 560 MB in 2.01 seconds = 279.05 MB/sec
Timing buffered disk reads: 10 MB in 3.27 seconds = 3.06 MB/sec

Danke für eure Hilfe!
Titel: Re: Festplatte sehr langsam?
Beitrag von: uname am 12.August 2009, 20:54:52: Schau hier:

http://wiki.ubuntuusers.de/DMA

Dort steht wie du DMA temporär und dauerhaft aktivieren kannst. Wiederhole anschließend die obigen beiden Befehle.
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 13.August 2009, 15:19:52: ES GEHT NICHT!
Nach etlichen Versuchen sagt er mir immernoch "invalid argument" oder sowas...

Was soll das?
Titel: Re: Festplatte sehr langsam?
Beitrag von: cmdLine am 13.August 2009, 15:43:10: Welche Werte erhälst du denn durchschnittlich, z.b. bei "dd if=/dev/zero of=testfile bs=1M count=1024"?
Titel: Re: Festplatte sehr langsam?
Beitrag von: uname am 13.August 2009, 15:47:04: Poste genau die Ein- und Ausgaben, damit wir die Fehler deuten können.
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 13.August 2009, 16:14:43: Zitat von: uname am 13.August 2009, 15:47:04
Poste genau die Ein- und Ausgaben, damit wir die Fehler deuten können.

91-143-81-201:~# hdparm /dev/hda2
/dev/hda2:
multcount = 0 (off)
IO_support = 0 (default)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 16383/255/63, sectors = 152301303, start = 4000185

91-143-81-201:~# hdparm -c1 -d1 /dev/hda2

/dev/hda2:
setting 32-bit IO_support flag to 1
HDIO_SET_32BIT failed: Invalid argument
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Invalid argument
IO_support = 0 (default)
using_dma = 0 (off)

Ich hoffe das hilft euch weiter ;)
Titel: Re: Festplatte sehr langsam?
Beitrag von: uname am 13.August 2009, 16:29:26: Versuche mal das Device und nicht die Partition:

Code: [Auswählen]
hdparm -c1 -d1 /dev/hda (ohne die 2 am Ende)
Wenn das auch zu Fehlern führt müsste sich wohl EuServ zu dem Thema äußern.
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 13.August 2009, 16:35:42: Das sieht schonmal besser aus...
Allerdings bleibt DMA immernoch auf "0"

91-143-81-201:~# hdparm -c1 -d1 /dev/hda
/dev/hda:
setting 32-bit IO_support flag to 1
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
IO_support = 1 (32-bit)
using_dma = 0 (off)
Titel: Re: Festplatte sehr langsam?
Beitrag von: dakiIIa am 13.August 2009, 18:00:01: ist dein nutzer unterpriviligiert? (rootrechte?)
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 13.August 2009, 18:08:20: ich versuche das ganze mit dem Benutzer "root"
Titel: Re: Festplatte sehr langsam?
Beitrag von: timo am 13.August 2009, 21:43:27: Hallo,

ein:

Code: [Auswählen]
hdparm -i /dev/hda
bringt eine gute Ausgabe über aktuell genutzte DMA Modi usw.

Gruß Timo,
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 14.August 2009, 20:17:55: 91-143-81-201:~# hdparm -i /dev/hda

/dev/hda:

Model=WDC WD800BB-00FRA0, FwRev=77.07W77, SerialNo=WD-WMAJD1168554
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6

* signifies the current active mode

Hilft dir das weiter?
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 16.August 2009, 23:02:50: Was sagt den EuServ dazu ???

3 MB/s ist ja wohl nichts.....

Ich denke mal es liegt an dem SIS Chipsatz mach mal ein

lspci

dann wirst Du wahrscheinlich dieses sehen:
Code: [Auswählen]
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 741/741GX/M741 Host (rev 03) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25) 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
und mit dem Befehl:

dmesg

wirst du wahrscheinlich dieses finden:
Code: [Auswählen]
[ 2.958273] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 2.958283] SIS5513: IDE controller (0x1039:0x5513 rev 0x00) at PCI slot 0000:00:02.5 [ 2.958292] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:02.5 [ 2.958296] SIS5513: can't reserve resources [ 2.958343] SIS_IDE: probe of 0000:00:02.5 failed with error -16
Und wenn der Chipsatz nicht geladen wird gibts auch kein DMA weil der Generic IDE Treiber geladen wird und dieser kann kein DMA..

Das der Generic IDE geladen ist siehst Du mit:

cat /proc/ide/ide0/model

EuServ how to solve this Problem?

Gruß
Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 17.August 2009, 20:46:45: RalfM, du hast 10000000%ig recht!

Es kotzt mich richtig an, das ich den server nicht nutzen kann, weil er einfach völlig lahmt...

Wenn das so weitergeht,... Ich werde nicht eher bezahlen bevor der Server läuft!
Und Euserv reagiert auch nicht auf meine Tickets...
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 00:17:16: Ja ich habe das gleiche Problem, sogar schon eigenen Kernel installiert aber nichts hilft.. Kann die Kiste einfach kein DMA beibringen....

So kann man die Kiste aber nicht gebrauchen....

Liebes Euserv Team hoffe Ihr kommt mit einer Lösung....

Regards
Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: timo am 18.August 2009, 14:50:43: Hallo,

wichtig ist, das Sie das sis5513 Modul laden für diesen Chipsatz. Dieser Chipsatz kann sehr wohl vollen DMA Modus.

Korrekt Ausgabe beim Start mit Modul sis5513 wäre:

Code: [Auswählen]
SIS5513: chipset revision 1 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS965 ATA 133 (2nd gen) controller ide0: BM-DMA at 0x1480-0x1487, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1488-0x148f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: ExcelStor Technology J8160, ATA DISK drive hda: selected mode 0x46 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 512KiB hda: 321672960 sectors (164696 MB) w/7384KiB Cache, CHS=20023/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3
Code: [Auswählen]
/dev/hda: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 20023/255/63, sectors = 321672960, start = 0
Wenn das Modul korrekt geladen ist, so sieht die Ausgabe von cat /proc/ide/sis folgendermaßen aus (1 HDD an Primary Master):

Code: [Auswählen]
SiS 5513 Ultra 133 chipset --------------- Primary Channel ---------------- Secondary Channel ------------- Channel Status: On On Operation Mode: Compatible Compatible Cable Type: 80 pins 40 pins Drive 0: UDMA Enabled UDMA Disabled UDMA Cycle Time 2 CLK UDMA Cycle Time Reserved Drive 1: UDMA Disabled UDMA Disabled UDMA Cycle Time Reserved UDMA Cycle Time Reserved
HDPARM Tests:
Code: [Auswählen]
hdparm -tT /dev/hda /dev/hda: Timing cached reads: 1344 MB in 2.11 seconds = 637.05 MB/sec Timing buffered disk reads: 206 MB in 3.04 seconds = 67.76 MB/sec
Gruß Timo,
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 15:17:54: Endschuldigung aber die Antwort ist ja wenig hilfreich...

Wie Sie sehen wird versucht den SIS5513 zu laden was aber fehlschlägt..

Habe ich oben geposted:
Zitat
[ 2.958273] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 2.958283] SIS5513: IDE controller (0x1039:0x5513 rev 0x00) at PCI slot 0000:00:02.5
[ 2.958292] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:02.5
[ 2.958296] SIS5513: can't reserve resources
[ 2.958343] SIS_IDE: probe of 0000:00:02.5 failed with error -16

SIS5513 ist im Kernel als Modul eincompiliert. Wird auch bei jeden start versucht zu laden was aber immer fehlschlägt. Danach wird der Generic geladen..

can't reserve resources kann auch bedeuten das im BIOS nicht DMA freigeschaltet ist.

Ein eintragen in /etc/modules bringt genauso wenig wie Kernel neu backen...

lsmod zeigt auch das der Treiber da ist aber wie die Fehlermeldung schon sagt keine Resourcen zugeewiesen bekommt..

sis5513 6788 0 [permanent]
via82cxxx 6948 0 [permanent]
ide_generic 2464 0 [permanent]

Gruß
Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: timo am 18.August 2009, 16:10:16: Hallo,

welche Bootoptionen nutzen Sie (/boot/grub/menu.lst oder grub.conf) ?
Event. hilft die Option "edd=off" alternativ, je nachdem ob Sie acpi und apic aus haben, diese getrennt zu aktivieren

1.) die Option nolapic und noapic weglassen
2.) die Option acpi=off weglassen und noapic nolapic setzen.
3.) die Option acpi=off und noapic nolapic weglassen

Es kann, je nach Hardware zu einer Nichterreichbarkeit kommen (dies hängt vom verwendeten Kernel, dessen Patches etc. ab).
Gegebenfalls kann dies jedoch immer per RescueSystem wieder korrigiert werden.

Ein kompletter boot.log Auszug wäre in diesem Fall mehr als hilfreich.

Hinweis: Die Antworten können nur so hilfreich sein, wie Sie uns als Informationen liefern.
a) Hier fehlen u.a. Welches Betriebssystem nutzen Sie genau.
b) Welchen Kernel nutzen sie genau ? Haben Sie etwas geändert (Patches etc.) ?
c) Was haben Sie bisher genau getan um diese Störung zu beheben ?

Gruß Timo,
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:00:47: Also ich benutze eine EuServ Debian 5.0r0 - 32Bit - Minimal System... nur mit apt-get update und apt-get upgrade behandelt... Keine Sonderpatches oder ähnliches... Versucht habe ich schon alles eigener Kernel und vieles mehr.. Kein DMA....

Kernel mit option edd=off
kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hda2 ro edd=off

Code: [Auswählen]
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14 01:27:18 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003dff8000 - 000000003e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] 95MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00fbc70] 000fbc70 [ 0.000000] Entering add_active_range(0, 0, 253936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 253936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 253936 [ 0.000000] On node 0 totalpages: 253936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 192 pages used for memmap [ 0.000000] HighMem zone: 24368 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FAA60, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 3DFF0000, 002C (r1 AMIINT SiS740XX 1000 MSFT 100000B) [ 0.000000] ACPI: FACP 3DFF0030, 0081 (r1 AMIINT SiS740XX 11 MSFT 100000B) [ 0.000000] ACPI: DSDT 3DFF0120, 3300 (r1 SiS 746 100 INTL 2002024) [ 0.000000] ACPI: FACS 3DFF8000, 0040 [ 0.000000] ACPI: APIC 3DFF00C0, 005A (r1 AMIINT SiS740XX 1000 MSFT 100000B) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:c0c00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251952 [ 0.000000] Kernel command line: root=/dev/hda2 ro edd=off quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1505.288 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 996672k/1015744k available (1769k kernel code, 18468k reserved, 751k data, 244k init, 98240k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba663 - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba663 (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084176] Calibrating delay using timer specific routine.. 3012.78 BogoMIPS (lpj=6025578) [ 0.084234] Security Framework initialized [ 0.084246] SELinux: Disabled at boot. [ 0.084258] Capability LSM initialized [ 0.084290] Mount-cache hash table entries: 512 [ 0.084542] Initializing cgroup subsys ns [ 0.084549] Initializing cgroup subsys cpuacct [ 0.084553] Initializing cgroup subsys devices [ 0.084589] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084593] CPU: L2 Cache: 256K (64 bytes/line) [ 0.084599] Intel machine check architecture supported. [ 0.084604] Intel machine check reporting enabled on CPU#0. [ 0.084628] Checking 'hlt' instruction... OK. [ 0.100422] SMP alternatives: switching to UP code [ 0.108774] Freeing SMP alternatives: 16k freed [ 0.108782] ACPI: Core revision 20080321 [ 0.116365] ENABLING IO-APIC IRQs [ 0.116560] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.156259] CPU0: AMD Sempron(tm) 2200+ stepping 00 [ 0.160010] Brought up 1 CPUs [ 0.160010] Total of 1 processors activated (3012.78 BogoMIPS). [ 0.160010] CPU0 attaching sched-domain: [ 0.160010] domain 0: span 0 [ 0.160010] groups: 0 [ 0.160010] net_namespace: 660 bytes [ 0.160010] Booting paravirtualized kernel on bare hardware [ 0.160010] NET: Registered protocol family 16 [ 0.160010] ACPI: bus type pci registered [ 0.160010] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 [ 0.160010] PCI: Using configuration type 1 for base access [ 0.160010] Setting up standard PCI resources [ 0.161008] ACPI: EC: Look up EC in DSDT [ 0.167037] ACPI: Interpreter enabled [ 0.167042] ACPI: (supports S0 S1 S4 S5) [ 0.167068] ACPI: Using IOAPIC for interrupt routing [ 0.171660] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.171895] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.172425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.178885] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.179036] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179318] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.179465] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.179611] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.179750] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179896] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.180094] ACPI: Power Resource [URP1] (off) [ 0.180135] ACPI: Power Resource [URP2] (off) [ 0.180173] ACPI: Power Resource [FDDP] (off) [ 0.180214] ACPI: Power Resource [LPTP] (off) [ 0.180331] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.180382] pnp: PnP ACPI init [ 0.180395] ACPI: bus type pnp registered [ 0.182496] pnp: PnP ACPI: found 8 devices [ 0.182500] ACPI: ACPI bus type pnp unregistered [ 0.182506] PnPBIOS: Disabled by ACPI PNP [ 0.182942] PCI: Using ACPI for IRQ routing [ 0.183259] ACPI: RTC can wake from S4 [ 0.183304] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.183309] system 00:01: ioport range 0x295-0x296 has been reserved [ 0.183313] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.183318] system 00:01: ioport range 0x880-0x8ff has been reserved [ 0.183322] system 00:01: ioport range 0xc00-0xc1f has been reserved [ 0.183329] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.213948] PCI: Bridge: 0000:00:01.0 [ 0.213953] IO window: c000-cfff [ 0.213960] MEM window: 0xcfd00000-0xcfefffff [ 0.213966] PREFETCH window: 0x00000000bfa00000-0x00000000cfbfffff [ 0.214012] NET: Registered protocol family 2 [ 0.214155] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.214664] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.217241] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.218541] TCP: Hash tables configured (established 131072 bind 65536) [ 0.218548] TCP reno registered [ 0.218743] NET: Registered protocol family 1 [ 0.218934] checking if image is initramfs... it is [ 0.716038] Switched to high resolution mode on CPU 0 [ 0.898728] Freeing initrd memory: 6428k freed [ 0.899885] audit: initializing netlink socket (disabled) [ 0.899907] type=2000 audit(1250605365.896:1): initialized [ 0.900147] highmem bounce pool size: 64 pages [ 0.900154] Total HugeTLB memory allocated, 0 [ 0.900255] VFS: Disk quotas dquot_6.5.1 [ 0.900303] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.900359] msgmni has been set to 1767 [ 0.900521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.900527] io scheduler noop registered [ 0.900530] io scheduler anticipatory registered [ 0.900533] io scheduler deadline registered [ 0.900545] io scheduler cfq registered (default) [ 0.932037] pci 0000:01:00.0: Boot video device [ 0.932562] isapnp: Scanning for PnP cards... [ 1.286228] isapnp: No Plug & Play device found [ 1.290160] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.290328] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.290916] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.293255] brd: module loaded [ 1.293396] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.293401] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.293587] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.293785] mice: PS/2 mouse device common for all mice [ 1.293967] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.293989] rtc0: alarms up to one year [ 1.294042] cpuidle: using governor ladder [ 1.294045] cpuidle: using governor menu [ 1.294054] No iBFT detected. [ 1.294834] TCP cubic registered [ 1.294840] NET: Registered protocol family 17 [ 1.294851] Using IPI No-Shortcut mode [ 1.295042] registered taskstats version 1 [ 1.295212] rtc_cmos 00:03: setting system clock to 2009-08-18 14:22:46 UTC (1250605366) [ 1.295626] Freeing unused kernel memory: 244k freed [ 1.343895] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.414611] Uniform Multi-Platform E-IDE driver [ 1.414623] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.415607] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.415628] Probing IDE interface ide0... [ 1.704159] hda: WDC WD800BB-55JKC0, ATA DISK drive [ 2.376094] Probing IDE interface ide1... [ 2.944094] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.944138] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.956682] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 2.956692] SIS5513: IDE controller (0x1039:0x5513 rev 0x00) at PCI slot 0000:00:02.5 [ 2.956702] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:02.5 [ 2.956705] SIS5513: can't reserve resources [ 2.956752] SIS_IDE: probe of 0000:00:02.5 failed with error -16 [ 2.977854] SCSI subsystem initialized [ 2.979543] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. [ 2.986097] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 2.994273] No dock devices found. [ 3.006197] libata version 3.00 loaded. [ 3.137443] Loading iSCSI transport class v2.0-869. [ 3.144259] iscsi: registered transport (tcp) [ 3.168827] device-mapper: uevent: version 1.0.3 [ 3.168956] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 3.178910] device-mapper: multipath: version 1.0.5 loaded [ 3.179745] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.186970] device-mapper: multipath emc: version 0.0.3 loaded [ 3.243090] md: multipath personality registered for level -4 [ 3.250191] md: faulty personality registered for level -5 [ 3.257497] md: raid0 personality registered for level 0 [ 3.266090] md: raid1 personality registered for level 1 [ 3.274662] md: raid10 personality registered for level 10 [ 3.281960] xor: automatically using best checksumming function: pIII_sse [ 3.300011] pIII_sse : 1401.000 MB/sec [ 3.300015] xor: using function: pIII_sse (1401.000 MB/sec) [ 3.301573] async_tx: api initialized (async) [ 3.376025] raid6: int32x1 585 MB/s [ 3.444096] raid6: int32x2 660 MB/s [ 3.512024] raid6: int32x4 547 MB/s [ 3.580100] raid6: int32x8 408 MB/s [ 3.648030] raid6: mmxx1 1254 MB/s [ 3.716021] raid6: mmxx2 2098 MB/s [ 3.784037] raid6: sse1x1 1129 MB/s [ 3.852018] raid6: sse1x2 1903 MB/s [ 3.852022] raid6: using algorithm sse1x2 (1903 MB/s) [ 3.852027] md: raid6 personality registered for level 6 [ 3.852030] md: raid5 personality registered for level 5 [ 3.852033] md: raid4 personality registered for level 4 [ 3.859401] md: linear personality registered for level -1 [ 3.878002] Driver 'sd' needs updating - please use bus_type methods [ 3.927666] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.935348] sis900.c: v1.08.10 Apr. 2 2006
weiter im nächsten Posting.
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:02:20: Code: [Auswählen]
[code] [ 3.935431] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 3.936491] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 3.946800] 0000:00:04.0: Using transceiver found at address 1 as default [ 3.947968] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:13:8f:23:29:be [ 3.955752] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 3.955759] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.964588] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 3.964595] Copyright (c) 1999-2006 Intel Corporation. [ 3.972750] 8139too Fast Ethernet driver 0.9.28 [ 3.987285] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 3.997055] console [netcon0] enabled [ 3.997061] netconsole: network logging started [ 4.036617] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 4.036621] originally by Donald Becker <becker@scyld.com> [ 4.036623] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 4.067313] 3c503.c: Presently autoprobing (not recommended) for a single card. [ 4.075306] 3c503.c: No 3c503 card found (i/o = 0x0). [ 4.082705] 3c505.c: warning, using default DMA channel, [ 4.082712] 3c505.c: module autoprobe not recommended, give io=xx. [ 4.082723] 3c505.c: Failed to register card at 0x0. [ 4.140592] 3c515.c:v0.99t-ac 28-Oct-2002 becker@scyld.com and others [ 4.193401] ACPI: ACPI0007:00 is registered as cooling_device0 [ 4.591723] hda: max request size: 128KiB [ 4.613755] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 [ 4.613830] hda: cache flushes supported [ 4.613921] hda: hda1 hda2 [ 4.924368] usbcore: registered new interface driver usbfs [ 4.924418] usbcore: registered new interface driver hub [ 4.924468] usbcore: registered new device driver usb [ 4.932331] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.932404] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.932429] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 4.932629] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 4.932668] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfff9000 [ 4.990218] usb usb1: configuration #1 chosen from 1 choice [ 4.990266] hub 1-0:1.0: USB hub found [ 4.990285] hub 1-0:1.0: 3 ports detected [ 5.097070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.097077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.097081] usb usb1: Product: OHCI Host Controller [ 5.097084] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.097087] usb usb1: SerialNumber: 0000:00:03.0 [ 5.097151] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 5.097197] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 5.097240] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 5.097275] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffa000 [ 5.156517] usb usb2: configuration #1 chosen from 1 choice [ 5.156568] hub 2-0:1.0: USB hub found [ 5.156595] hub 2-0:1.0: 3 ports detected [ 5.260336] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.260343] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.260347] usb usb2: Product: OHCI Host Controller [ 5.260350] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.260353] usb usb2: SerialNumber: 0000:00:03.1 [ 5.260550] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 23 [ 5.260575] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 5.260615] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 5.260670] PCI: cache line size of 64 is not supported by device 0000:00:03.2 [ 5.260695] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcfffb000 [ 5.272162] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.272319] usb usb3: configuration #1 chosen from 1 choice [ 5.272377] hub 3-0:1.0: USB hub found [ 5.272397] hub 3-0:1.0: 6 ports detected [ 5.376200] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.376207] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.376211] usb usb3: Product: EHCI Host Controller [ 5.376215] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 5.376218] usb usb3: SerialNumber: 0000:00:03.2 [ 5.492114] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.492121] EXT3-fs: write access will be enabled during recovery. [ 23.619931] kjournald starting. Commit interval 5 seconds [ 23.619959] EXT3-fs: recovery complete. [ 23.623505] EXT3-fs: mounted filesystem with ordered data mode. [ 26.781177] udevd version 125 started [ 28.331306] Linux agpgart interface v0.103 [ 28.377533] agpgart: Detected SiS chipset - id:1857 [ 28.382686] agpgart: AGP aperture is 64M @ 0xd0000000 [ 28.406231] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 28.420848] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 28.430155] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 28.629752] input: Power Button (FF) as /class/input/input1 [ 28.653289] ACPI: Power Button (FF) [PWRF] [ 28.653406] input: Power Button (CM) as /class/input/input2 [ 28.687766] ACPI: Power Button (CM) [PWRB] [ 29.415194] input: PC Speaker as /class/input/input3 [ 29.615946] Error: Driver 'pcspkr' is already registered, aborting... [ 30.929039] Adding 2000052k swap on /dev/hda1. Priority:-1 extents:1 across:2000052k [ 31.343273] EXT3 FS on hda2, internal journal [ 31.909443] loop: module loaded [ 32.168304] kjournald starting. Commit interval 5 seconds [ 32.168304] EXT3 FS on loop0, internal journal [ 32.168304] EXT3-fs: mounted filesystem with ordered data mode. [ 35.405015] eth0: Media Link On 100mbps full-duplex [ 38.272763] NET: Registered protocol family 10 [ 38.273497] lo: Disabled Privacy Extensions [ 48.756011] eth0: no IPv6 routers present[/code]
Kein DMA:

Nächster Versuch:
kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hda2 ro quiet

Code: [Auswählen]
dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14 01:27:18 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003dff8000 - 000000003e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] 95MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00fbc70] 000fbc70 [ 0.000000] Entering add_active_range(0, 0, 253936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 253936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 253936 [ 0.000000] On node 0 totalpages: 253936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 192 pages used for memmap [ 0.000000] HighMem zone: 24368 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FAA60, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 3DFF0000, 002C (r1 AMIINT SiS740XX 1000 MSFT 100000B) [ 0.000000] ACPI: FACP 3DFF0030, 0081 (r1 AMIINT SiS740XX 11 MSFT 100000B) [ 0.000000] ACPI: DSDT 3DFF0120, 3300 (r1 SiS 746 100 INTL 2002024) [ 0.000000] ACPI: FACS 3DFF8000, 0040 [ 0.000000] ACPI: APIC 3DFF00C0, 005A (r1 AMIINT SiS740XX 1000 MSFT 100000B) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:c0c00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251952 [ 0.000000] Kernel command line: root=/dev/hda2 ro quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1505.207 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled
next posting
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:03:26: Code: [Auswählen]
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 996672k/1015744k available (1769k kernel code, 18468k reserved, 751k data, 244k init, 98240k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba663 - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba663 (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084170] Calibrating delay using timer specific routine.. 3012.78 BogoMIPS (lpj=6025570) [ 0.084229] Security Framework initialized [ 0.084241] SELinux: Disabled at boot. [ 0.084247] Capability LSM initialized [ 0.084272] Mount-cache hash table entries: 512 [ 0.084525] Initializing cgroup subsys ns [ 0.084532] Initializing cgroup subsys cpuacct [ 0.084536] Initializing cgroup subsys devices [ 0.084565] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084570] CPU: L2 Cache: 256K (64 bytes/line) [ 0.084576] Intel machine check architecture supported. [ 0.084581] Intel machine check reporting enabled on CPU#0. [ 0.084605] Checking 'hlt' instruction... OK. [ 0.100412] SMP alternatives: switching to UP code [ 0.108764] Freeing SMP alternatives: 16k freed [ 0.108772] ACPI: Core revision 20080321 [ 0.116339] ENABLING IO-APIC IRQs [ 0.116535] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.156233] CPU0: AMD Sempron(tm) 2200+ stepping 00 [ 0.160010] Brought up 1 CPUs [ 0.160010] Total of 1 processors activated (3012.78 BogoMIPS). [ 0.160010] CPU0 attaching sched-domain: [ 0.160010] domain 0: span 0 [ 0.160010] groups: 0 [ 0.160010] net_namespace: 660 bytes [ 0.160010] Booting paravirtualized kernel on bare hardware [ 0.160010] NET: Registered protocol family 16 [ 0.160010] ACPI: bus type pci registered [ 0.160010] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 [ 0.160010] PCI: Using configuration type 1 for base access [ 0.160010] Setting up standard PCI resources [ 0.160971] ACPI: EC: Look up EC in DSDT [ 0.166971] ACPI: Interpreter enabled [ 0.166976] ACPI: (supports S0 S1 S4 S5) [ 0.166995] ACPI: Using IOAPIC for interrupt routing [ 0.171590] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.171825] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.172350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.178777] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.178927] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179069] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179210] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.179356] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.179498] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.179638] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179778] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.179924] ACPI: Power Resource [URP1] (off) [ 0.179964] ACPI: Power Resource [URP2] (off) [ 0.180002] ACPI: Power Resource [FDDP] (off) [ 0.180097] ACPI: Power Resource [LPTP] (off) [ 0.180214] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.180266] pnp: PnP ACPI init [ 0.180279] ACPI: bus type pnp registered [ 0.182382] pnp: PnP ACPI: found 8 devices [ 0.182386] ACPI: ACPI bus type pnp unregistered [ 0.182392] PnPBIOS: Disabled by ACPI PNP [ 0.182826] PCI: Using ACPI for IRQ routing [ 0.183139] ACPI: RTC can wake from S4 [ 0.183182] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.183187] system 00:01: ioport range 0x295-0x296 has been reserved [ 0.183192] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.183196] system 00:01: ioport range 0x880-0x8ff has been reserved [ 0.183200] system 00:01: ioport range 0xc00-0xc1f has been reserved [ 0.183206] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.213816] PCI: Bridge: 0000:00:01.0 [ 0.213821] IO window: c000-cfff [ 0.213829] MEM window: 0xcfd00000-0xcfefffff [ 0.213834] PREFETCH window: 0x00000000bfa00000-0x00000000cfbfffff [ 0.213880] NET: Registered protocol family 2 [ 0.214016] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.214520] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.217086] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.218384] TCP: Hash tables configured (established 131072 bind 65536) [ 0.218390] TCP reno registered [ 0.218578] NET: Registered protocol family 1 [ 0.218768] checking if image is initramfs... it is [ 0.716065] Switched to high resolution mode on CPU 0 [ 0.898600] Freeing initrd memory: 6428k freed [ 0.899751] audit: initializing netlink socket (disabled) [ 0.899773] type=2000 audit(1250605948.896:1): initialized [ 0.900001] highmem bounce pool size: 64 pages [ 0.900020] Total HugeTLB memory allocated, 0 [ 0.900123] VFS: Disk quotas dquot_6.5.1 [ 0.900171] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.900228] msgmni has been set to 1767 [ 0.900390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.900396] io scheduler noop registered [ 0.900399] io scheduler anticipatory registered [ 0.900402] io scheduler deadline registered [ 0.900414] io scheduler cfq registered (default) [ 0.932037] pci 0000:01:00.0: Boot video device [ 0.932554] isapnp: Scanning for PnP cards... [ 1.286241] isapnp: No Plug & Play device found [ 1.290130] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.290298] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.290876] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.293206] brd: module loaded [ 1.293347] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.293352] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.293526] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.293723] mice: PS/2 mouse device common for all mice [ 1.293902] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.293924] rtc0: alarms up to one year [ 1.293977] cpuidle: using governor ladder [ 1.293980] cpuidle: using governor menu [ 1.293988] No iBFT detected. [ 1.294757] TCP cubic registered [ 1.294762] NET: Registered protocol family 17 [ 1.294773] Using IPI No-Shortcut mode [ 1.294964] registered taskstats version 1 [ 1.295129] rtc_cmos 00:03: setting system clock to 2009-08-18 14:32:29 UTC (1250605949) [ 1.295543] Freeing unused kernel memory: 244k freed [ 1.343992] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.414302] Uniform Multi-Platform E-IDE driver [ 1.414313] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.415281] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.415301] Probing IDE interface ide0... [ 1.704159] hda: WDC WD800BB-55JKC0, ATA DISK drive [ 2.376091] Probing IDE interface ide1... [ 2.944094] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.944138] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.956518] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 2.956527] SIS5513: IDE controller (0x1039:0x5513 rev 0x00) at PCI slot 0000:00:02.5 [ 2.956537] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:02.5 [ 2.956541] SIS5513: can't reserve resources [ 2.956588] SIS_IDE: probe of 0000:00:02.5 failed with error -16 [ 2.977663] SCSI subsystem initialized [ 2.979340] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. [ 2.985866] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 2.993780] No dock devices found. [ 3.005722] libata version 3.00 loaded. [ 3.136441] Loading iSCSI transport class v2.0-869. [ 3.143097] iscsi: registered transport (tcp) [ 3.167560] device-mapper: uevent: version 1.0.3 [ 3.167692] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 3.177648] device-mapper: multipath: version 1.0.5 loaded [ 3.178472] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.185741] device-mapper: multipath emc: version 0.0.3 loaded [ 3.241434] md: multipath personality registered for level -4 [ 3.248445] md: faulty personality registered for level -5 [ 3.255586] md: raid0 personality registered for level 0 [ 3.264259] md: raid1 personality registered for level 1 [ 3.272753] md: raid10 personality registered for level 10 [ 3.279871] xor: automatically using best checksumming function: pIII_sse [ 3.296011] pIII_sse : 1270.000 MB/sec [ 3.296015] xor: using function: pIII_sse (1270.000 MB/sec) [ 3.297582] async_tx: api initialized (async) [ 3.368020] raid6: int32x1 586 MB/s [ 3.436033] raid6: int32x2 658 MB/s [ 3.504004] raid6: int32x4 525 MB/s [ 3.572156] raid6: int32x8 409 MB/s [ 3.640044] raid6: mmxx1 1250 MB/s [ 3.708023] raid6: mmxx2 2105 MB/s [ 3.776023] raid6: sse1x1 1131 MB/s [ 3.844029] raid6: sse1x2 1901 MB/s [ 3.844033] raid6: using algorithm sse1x2 (1901 MB/s) [ 3.844038] md: raid6 personality registered for level 6 [ 3.844041] md: raid5 personality registered for level 5 [ 3.844045] md: raid4 personality registered for level 4 [ 3.851270] md: linear personality registered for level -1 [ 3.869766] Driver 'sd' needs updating - please use bus_type methods [ 3.918981] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.926616] sis900.c: v1.08.10 Apr. 2 2006 [ 3.926699] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 3.927732] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 3.938065] 0000:00:04.0: Using transceiver found at address 1 as default [ 3.939237] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:13:8f:23:29:be [ 3.947021] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 3.947028] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.955787] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 3.955794] Copyright (c) 1999-2006 Intel Corporation. [ 3.963833] 8139too Fast Ethernet driver 0.9.28 [ 3.978266] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 3.987962] console [netcon0] enabled [ 3.987969] netconsole: network logging started [ 4.027234] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 4.027238] originally by Donald Becker <becker@scyld.com> [ 4.027240] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 4.057629] 3c503.c: Presently autoprobing (not recommended) for a single card. [ 4.065625] 3c503.c: No 3c503 card found (i/o = 0x0). [ 4.072978] 3c505.c: warning, using default DMA channel, [ 4.072984] 3c505.c: module autoprobe not recommended, give io=xx. [ 4.072995] 3c505.c: Failed to register card at 0x0. [ 4.130687] 3c515.c:v0.99t-ac 28-Oct-2002 becker@scyld.com and others [ 4.183081] ACPI: ACPI0007:00 is registered as cooling_device0 [ 4.536545] hda: max request size: 128KiB [ 4.558853] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 [ 4.558940] hda: cache flushes supported [ 4.559025] hda: hda1 hda2 [ 4.897333] usbcore: registered new interface driver usbfs [ 4.897383] usbcore: registered new interface driver hub [ 4.897432] usbcore: registered new device driver usb [ 4.900765] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.900842] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.900867] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 4.901073] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 4.901105] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfff9000 [ 4.958192] usb usb1: configuration #1 chosen from 1 choice [ 4.958239] hub 1-0:1.0: USB hub found [ 4.958258] hub 1-0:1.0: 3 ports detected [ 5.060299] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.060306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.060310] usb usb1: Product: OHCI Host Controller [ 5.060313] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.060316] usb usb1: SerialNumber: 0000:00:03.0 [ 5.060379] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 5.060416] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 5.060459] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 5.060493] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffa000 [ 5.118258] usb usb2: configuration #1 chosen from 1 choice [ 5.118308] hub 2-0:1.0: USB hub found [ 5.118329] hub 2-0:1.0: 3 ports detected [ 5.225647] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.225655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.225659] usb usb2: Product: OHCI Host Controller [ 5.225662] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.225665] usb usb2: SerialNumber: 0000:00:03.1 [ 5.225854] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 23 [ 5.225879] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 5.225919] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 5.225976] PCI: cache line size of 64 is not supported by device 0000:00:03.2 [ 5.226002] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcfffb000 [ 5.236584] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.237646] usb usb3: configuration #1 chosen from 1 choice [ 5.237699] hub 3-0:1.0: USB hub found [ 5.237718] hub 3-0:1.0: 6 ports detected [ 5.340196] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.340203] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.340207] usb usb3: Product: EHCI Host Controller [ 5.340210] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 5.340213] usb usb3: SerialNumber: 0000:00:03.2 [ 5.435249] kjournald starting. Commit interval 5 seconds [ 5.435249] EXT3-fs: mounted filesystem with ordered data mode. [ 8.623495] udevd version 125 started [ 10.164819] Linux agpgart interface v0.103 [ 10.198054] agpgart: Detected SiS chipset - id:1857 [ 10.203238] agpgart: AGP aperture is 64M @ 0xd0000000 [ 10.215338] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 10.273309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.291615] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.471545] input: Power Button (FF) as /class/input/input1 [ 10.503871] ACPI: Power Button (FF) [PWRF] [ 10.503994] input: Power Button (CM) as /class/input/input2 [ 10.528214] ACPI: Power Button (CM) [PWRB] [ 11.297878] input: PC Speaker as /class/input/input3 [ 11.509296] Error: Driver 'pcspkr' is already registered, aborting... [ 12.829486] Adding 2000052k swap on /dev/hda1. Priority:-1 extents:1 across:2000052k [ 13.300264] EXT3 FS on hda2, internal journal [ 13.659916] loop: module loaded [ 14.018871] kjournald starting. Commit interval 5 seconds [ 14.018931] EXT3 FS on loop0, internal journal [ 14.018938] EXT3-fs: mounted filesystem with ordered data mode. [ 17.421013] eth0: Media Link On 100mbps full-duplex [ 20.565368] NET: Registered protocol family 10 [ 20.566103] lo: Disabled Privacy Extensions [ 30.772011] eth0: no IPv6 routers present
Wieder nix Fehler SIS5513:

hdparm -d 1 /dev/hda

/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:04:20: Und nun
kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hda2 ro noapic nolapic quiet

Code: [Auswählen]
dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14 01:27:18 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003dff8000 - 000000003e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] 95MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00fbc70] 000fbc70 [ 0.000000] Entering add_active_range(0, 0, 253936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 253936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 253936 [ 0.000000] On node 0 totalpages: 253936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 192 pages used for memmap [ 0.000000] HighMem zone: 24368 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FAA60, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 3DFF0000, 002C (r1 AMIINT SiS740XX 1000 MSFT 100000B) [ 0.000000] ACPI: FACP 3DFF0030, 0081 (r1 AMIINT SiS740XX 11 MSFT 100000B) [ 0.000000] ACPI: DSDT 3DFF0120, 3300 (r1 SiS 746 100 INTL 2002024) [ 0.000000] ACPI: FACS 3DFF8000, 0040 [ 0.000000] ACPI: APIC 3DFF00C0, 005A (r1 AMIINT SiS740XX 1000 MSFT 100000B) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: SiS Product ID: 741 <6>MPTABLE: Product ID: 741 <6>MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 1 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:c0c00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251952 [ 0.000000] Kernel command line: root=/dev/hda2 ro noapic nolapic quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1505.291 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 996672k/1015744k available (1769k kernel code, 18468k reserved, 751k data, 244k init, 98240k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba663 - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba663 (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084170] Calibrating delay using timer specific routine.. 3012.77 BogoMIPS (lpj=6025559) [ 0.084229] Security Framework initialized [ 0.084241] SELinux: Disabled at boot. [ 0.084247] Capability LSM initialized [ 0.084272] Mount-cache hash table entries: 512 [ 0.084526] Initializing cgroup subsys ns [ 0.084532] Initializing cgroup subsys cpuacct [ 0.084536] Initializing cgroup subsys devices [ 0.084566] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084570] CPU: L2 Cache: 256K (64 bytes/line) [ 0.084576] Intel machine check architecture supported. [ 0.084581] Intel machine check reporting enabled on CPU#0. [ 0.084605] Checking 'hlt' instruction... OK. [ 0.100412] SMP alternatives: switching to UP code [ 0.108732] Freeing SMP alternatives: 16k freed [ 0.108740] ACPI: Core revision 20080321 [ 0.115621] ACPI: setting ELCR to 0200 (from 0ca8) [ 0.116050] CPU0: AMD Sempron(tm) 2200+ stepping 00 [ 0.120007] Brought up 1 CPUs [ 0.120007] Total of 1 processors activated (3012.77 BogoMIPS). [ 0.120007] CPU0 attaching sched-domain: [ 0.120007] domain 0: span 0 [ 0.120007] groups: 0 [ 0.120007] net_namespace: 660 bytes [ 0.120007] Booting paravirtualized kernel on bare hardware [ 0.120007] NET: Registered protocol family 16 [ 0.120007] ACPI: bus type pci registered [ 0.120007] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 [ 0.120007] PCI: Using configuration type 1 for base access [ 0.120007] Setting up standard PCI resources [ 0.121002] ACPI: EC: Look up EC in DSDT [ 0.126953] ACPI: Interpreter enabled [ 0.126958] ACPI: (supports S0 S1 S4 S5) [ 0.126978] ACPI: Using PIC for interrupt routing [ 0.131559] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.131795] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.132318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.138787] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.138932] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.139073] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
weiter next
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:05:09: Code: [Auswählen]
[ 0.139213] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.139356] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.139496] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.139634] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.139773] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.139917] ACPI: Power Resource [URP1] (off) [ 0.139956] ACPI: Power Resource [URP2] (off) [ 0.139995] ACPI: Power Resource [FDDP] (off) [ 0.140087] ACPI: Power Resource [LPTP] (off) [ 0.140204] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.140255] pnp: PnP ACPI init [ 0.140268] ACPI: bus type pnp registered [ 0.142353] pnp: PnP ACPI: found 8 devices [ 0.142358] ACPI: ACPI bus type pnp unregistered [ 0.142363] PnPBIOS: Disabled by ACPI PNP [ 0.142790] PCI: Using ACPI for IRQ routing [ 0.143095] ACPI: RTC can wake from S4 [ 0.143137] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.143142] system 00:01: ioport range 0x295-0x296 has been reserved [ 0.143147] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.143151] system 00:01: ioport range 0x880-0x8ff has been reserved [ 0.143155] system 00:01: ioport range 0xc00-0xc1f has been reserved [ 0.143161] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.173767] PCI: Bridge: 0000:00:01.0 [ 0.173772] IO window: c000-cfff [ 0.173779] MEM window: 0xcfd00000-0xcfefffff [ 0.173785] PREFETCH window: 0x00000000bfa00000-0x00000000cfbfffff [ 0.173832] NET: Registered protocol family 2 [ 0.173972] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.174498] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.177077] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.178377] TCP: Hash tables configured (established 131072 bind 65536) [ 0.178384] TCP reno registered [ 0.178571] NET: Registered protocol family 1 [ 0.178764] checking if image is initramfs... it is [ 0.676036] Switched to high resolution mode on CPU 0 [ 0.857369] Freeing initrd memory: 6428k freed [ 0.858478] audit: initializing netlink socket (disabled) [ 0.858501] type=2000 audit(1250606234.856:1): initialized [ 0.858733] highmem bounce pool size: 64 pages [ 0.858740] Total HugeTLB memory allocated, 0 [ 0.858840] VFS: Disk quotas dquot_6.5.1 [ 0.858888] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.858945] msgmni has been set to 1767 [ 0.859104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.859110] io scheduler noop registered [ 0.859114] io scheduler anticipatory registered [ 0.859117] io scheduler deadline registered [ 0.859128] io scheduler cfq registered (default) [ 0.888039] pci 0000:01:00.0: Boot video device [ 0.888556] isapnp: Scanning for PnP cards... [ 1.242227] isapnp: No Plug & Play device found [ 1.246094] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.246262] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.246845] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.249178] brd: module loaded [ 1.249321] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.249326] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.249495] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.249695] mice: PS/2 mouse device common for all mice [ 1.249872] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.249895] rtc0: alarms up to one year [ 1.249948] cpuidle: using governor ladder [ 1.249952] cpuidle: using governor menu [ 1.249961] No iBFT detected. [ 1.250676] TCP cubic registered [ 1.250681] NET: Registered protocol family 17 [ 1.250692] Using IPI No-Shortcut mode [ 1.250883] registered taskstats version 1 [ 1.251050] rtc_cmos 00:03: setting system clock to 2009-08-18 14:37:15 UTC (1250606235) [ 1.251463] Freeing unused kernel memory: 244k freed [ 1.299790] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.370226] Uniform Multi-Platform E-IDE driver [ 1.370238] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.371220] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.371240] Probing IDE interface ide0... [ 1.660160] hda: WDC WD800BB-55JKC0, ATA DISK drive [ 2.332096] Probing IDE interface ide1... [ 2.900091] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.900133] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.912507] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 2.912518] SIS5513: IDE controller (0x1039:0x5513 rev 0x00) at PCI slot 0000:00:02.5 [ 2.912528] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:02.5 [ 2.912532] SIS5513: can't reserve resources [ 2.912579] SIS_IDE: probe of 0000:00:02.5 failed with error -16 [ 2.933616] SCSI subsystem initialized [ 2.935306] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. [ 2.941857] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 2.949829] No dock devices found. [ 2.961757] libata version 3.00 loaded. [ 3.092201] Loading iSCSI transport class v2.0-869. [ 3.098841] iscsi: registered transport (tcp) [ 3.123420] device-mapper: uevent: version 1.0.3 [ 3.123548] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 3.133507] device-mapper: multipath: version 1.0.5 loaded [ 3.134336] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.141618] device-mapper: multipath emc: version 0.0.3 loaded [ 3.197331] md: multipath personality registered for level -4 [ 3.204400] md: faulty personality registered for level -5 [ 3.211552] md: raid0 personality registered for level 0 [ 3.220257] md: raid1 personality registered for level 1 [ 3.228672] md: raid10 personality registered for level 10 [ 3.235747] xor: automatically using best checksumming function: pIII_sse [ 3.252011] pIII_sse : 1875.000 MB/sec [ 3.252015] xor: using function: pIII_sse (1875.000 MB/sec) [ 3.253577] async_tx: api initialized (async) [ 3.324109] raid6: int32x1 585 MB/s [ 3.392038] raid6: int32x2 660 MB/s [ 3.460024] raid6: int32x4 526 MB/s [ 3.528084] raid6: int32x8 410 MB/s [ 3.596044] raid6: mmxx1 1260 MB/s [ 3.664017] raid6: mmxx2 2109 MB/s [ 3.732019] raid6: sse1x1 1131 MB/s [ 3.800023] raid6: sse1x2 1901 MB/s [ 3.800027] raid6: using algorithm sse1x2 (1901 MB/s) [ 3.800032] md: raid6 personality registered for level 6 [ 3.800035] md: raid5 personality registered for level 5 [ 3.800038] md: raid4 personality registered for level 4 [ 3.807213] md: linear personality registered for level -1 [ 3.825828] Driver 'sd' needs updating - please use bus_type methods [ 3.875042] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.882737] sis900.c: v1.08.10 Apr. 2 2006 [ 3.883070] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7 [ 3.883076] PCI: setting IRQ 7 as level-triggered [ 3.883080] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 [ 3.884144] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 3.894442] 0000:00:04.0: Using transceiver found at address 1 as default [ 3.895617] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 7, 00:13:8f:23:29:be [ 3.903400] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 3.903406] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.912161] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 3.912168] Copyright (c) 1999-2006 Intel Corporation. [ 3.920259] 8139too Fast Ethernet driver 0.9.28 [ 3.934599] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 3.944356] console [netcon0] enabled [ 3.944362] netconsole: network logging started [ 3.983810] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 3.983814] originally by Donald Becker <becker@scyld.com> [ 3.983816] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 4.014205] 3c503.c: Presently autoprobing (not recommended) for a single card. [ 4.022202] 3c503.c: No 3c503 card found (i/o = 0x0). [ 4.029536] 3c505.c: warning, using default DMA channel, [ 4.029543] 3c505.c: module autoprobe not recommended, give io=xx. [ 4.029554] 3c505.c: Failed to register card at 0x0. [ 4.087250] 3c515.c:v0.99t-ac 28-Oct-2002 becker@scyld.com and others [ 4.139787] ACPI: ACPI0007:00 is registered as cooling_device0 [ 4.531290] hda: max request size: 128KiB [ 4.553668] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 [ 4.557302] hda: cache flushes supported [ 4.557386] hda: hda1 hda2 [ 4.868216] usbcore: registered new interface driver usbfs [ 4.868265] usbcore: registered new interface driver hub [ 4.868338] usbcore: registered new device driver usb [ 4.872782] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.873092] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3 [ 4.873097] PCI: setting IRQ 3 as level-triggered [ 4.873102] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 3 (level, low) -> IRQ 3 [ 4.873126] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 4.873335] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 4.873360] ohci_hcd 0000:00:03.0: irq 3, io mem 0xcfff9000 [ 4.930182] usb usb1: configuration #1 chosen from 1 choice [ 4.930229] hub 1-0:1.0: USB hub found [ 4.930249] hub 1-0:1.0: 3 ports detected [ 5.036813] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.036813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.036813] usb usb1: Product: OHCI Host Controller [ 5.036813] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.036813] usb usb1: SerialNumber: 0000:00:03.0 [ 5.036813] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 [ 5.036813] PCI: setting IRQ 5 as level-triggered [ 5.036813] ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5 [ 5.036813] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 5.036813] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 5.036813] ohci_hcd 0000:00:03.1: irq 5, io mem 0xcfffa000 [ 5.094196] usb usb2: configuration #1 chosen from 1 choice [ 5.094247] hub 2-0:1.0: USB hub found [ 5.094269] hub 2-0:1.0: 3 ports detected [ 5.205994] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.206001] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.206005] usb usb2: Product: OHCI Host Controller [ 5.206009] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.206012] usb usb2: SerialNumber: 0000:00:03.1 [ 5.206435] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 5.206441] PCI: setting IRQ 10 as level-triggered [ 5.206445] ACPI: PCI Interrupt 0000:00:03.2[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 5.206470] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 5.206516] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 5.206571] PCI: cache line size of 64 is not supported by device 0000:00:03.2 [ 5.206585] ehci_hcd 0000:00:03.2: irq 10, io mem 0xcfffb000 [ 5.217266] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.217418] usb usb3: configuration #1 chosen from 1 choice [ 5.217470] hub 3-0:1.0: USB hub found [ 5.217488] hub 3-0:1.0: 6 ports detected [ 5.316018] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.316018] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.316018] usb usb3: Product: EHCI Host Controller [ 5.316018] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 5.316018] usb usb3: SerialNumber: 0000:00:03.2 [ 5.427538] kjournald starting. Commit interval 5 seconds [ 5.427557] EXT3-fs: mounted filesystem with ordered data mode. [ 8.110994] spurious 8259A interrupt: IRQ7. [ 8.632311] udevd version 125 started [ 10.190395] Linux agpgart interface v0.103 [ 10.215390] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.230221] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.238204] agpgart: Detected SiS chipset - id:1857 [ 10.243452] agpgart: AGP aperture is 64M @ 0xd0000000 [ 10.364135] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 10.505550] input: Power Button (FF) as /class/input/input1 [ 10.533194] ACPI: Power Button (FF) [PWRF] [ 10.533310] input: Power Button (CM) as /class/input/input2 [ 10.563431] ACPI: Power Button (CM) [PWRB] [ 11.315051] input: PC Speaker as /class/input/input3 [ 11.526405] Error: Driver 'pcspkr' is already registered, aborting... [ 12.836012] Adding 2000052k swap on /dev/hda1. Priority:-1 extents:1 across:2000052k [ 13.311214] EXT3 FS on hda2, internal journal [ 13.668579] loop: module loaded [ 14.027385] kjournald starting. Commit interval 5 seconds [ 14.027453] EXT3 FS on loop0, internal journal [ 14.027460] EXT3-fs: mounted filesystem with ordered data mode. [ 17.421017] eth0: Media Link On 100mbps full-duplex [ 20.591041] NET: Registered protocol family 10 [ 20.591771] lo: Disabled Privacy Extensions [ 30.919597] eth0: no IPv6 routers present
Und immer noch nix SIS5513 immer noch keine Resourcen....

weiter next
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:06:03: weiter alles mal einschalten:

kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hda2 ro acpi=force apic lapic quiet

Code: [Auswählen]
dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14 01:27:18 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003dff8000 - 000000003e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] 95MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00fbc70] 000fbc70 [ 0.000000] Entering add_active_range(0, 0, 253936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 253936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 253936 [ 0.000000] On node 0 totalpages: 253936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 192 pages used for memmap [ 0.000000] HighMem zone: 24368 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FAA60, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 3DFF0000, 002C (r1 AMIINT SiS740XX 1000 MSFT 100000B) [ 0.000000] ACPI: FACP 3DFF0030, 0081 (r1 AMIINT SiS740XX 11 MSFT 100000B) [ 0.000000] ACPI: DSDT 3DFF0120, 3300 (r1 SiS 746 100 INTL 2002024) [ 0.000000] ACPI: FACS 3DFF8000, 0040 [ 0.000000] ACPI: APIC 3DFF00C0, 005A (r1 AMIINT SiS740XX 1000 MSFT 100000B) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:c0c00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251952 [ 0.000000] Kernel command line: root=/dev/hda2 ro acpi=force apic lapic quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1505.291 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 996672k/1015744k available (1769k kernel code, 18468k reserved, 751k data, 244k init, 98240k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba663 - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba663 (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084170] Calibrating delay using timer specific routine.. 3012.78 BogoMIPS (lpj=6025571) [ 0.084228] Security Framework initialized [ 0.084241] SELinux: Disabled at boot. [ 0.084247] Capability LSM initialized [ 0.084272] Mount-cache hash table entries: 512 [ 0.084525] Initializing cgroup subsys ns [ 0.084532] Initializing cgroup subsys cpuacct [ 0.084536] Initializing cgroup subsys devices [ 0.084566] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084570] CPU: L2 Cache: 256K (64 bytes/line) [ 0.084576] Intel machine check architecture supported. [ 0.084581] Intel machine check reporting enabled on CPU#0. [ 0.084605] Checking 'hlt' instruction... OK. [ 0.100412] SMP alternatives: switching to UP code [ 0.108766] Freeing SMP alternatives: 16k freed [ 0.108773] ACPI: Core revision 20080321 [ 0.116340] ENABLING IO-APIC IRQs [ 0.116535] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.156234] CPU0: AMD Sempron(tm) 2200+ stepping 00 [ 0.160010] Brought up 1 CPUs [ 0.160010] Total of 1 processors activated (3012.78 BogoMIPS). [ 0.160010] CPU0 attaching sched-domain: [ 0.160010] domain 0: span 0 [ 0.160010] groups: 0 [ 0.160010] net_namespace: 660 bytes [ 0.160010] Booting paravirtualized kernel on bare hardware [ 0.160010] NET: Registered protocol family 16 [ 0.160010] ACPI: bus type pci registered [ 0.160010] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 [ 0.160010] PCI: Using configuration type 1 for base access [ 0.160010] Setting up standard PCI resources [ 0.160979] ACPI: EC: Look up EC in DSDT [ 0.166964] ACPI: Interpreter enabled [ 0.166969] ACPI: (supports S0 S1 S4 S5) [ 0.166988] ACPI: Using IOAPIC for interrupt routing [ 0.171582] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.171817] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.172341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.178771] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.178921] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179062] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179202] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.179348] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.179489] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.179629] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.179768] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.179914] ACPI: Power Resource [URP1] (off) [ 0.179954] ACPI: Power Resource [URP2] (off) [ 0.179992] ACPI: Power Resource [FDDP] (off) [ 0.180084] ACPI: Power Resource [LPTP] (off) [ 0.180203] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.180254] pnp: PnP ACPI init [ 0.180267] ACPI: bus type pnp registered [ 0.182367] pnp: PnP ACPI: found 8 devices [ 0.182372] ACPI: ACPI bus type pnp unregistered [ 0.182377] PnPBIOS: Disabled by ACPI PNP [ 0.182811] PCI: Using ACPI for IRQ routing [ 0.183123] ACPI: RTC can wake from S4 [ 0.183166] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.183171] system 00:01: ioport range 0x295-0x296 has been reserved [ 0.183176] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.183180] system 00:01: ioport range 0x880-0x8ff has been reserved [ 0.183184] system 00:01: ioport range 0xc00-0xc1f has been reserved [ 0.183190] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.213799] PCI: Bridge: 0000:00:01.0 [ 0.213804] IO window: c000-cfff [ 0.213811] MEM window: 0xcfd00000-0xcfefffff [ 0.213817] PREFETCH window: 0x00000000bfa00000-0x00000000cfbfffff [ 0.213863] NET: Registered protocol family 2 [ 0.213998] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.214501] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
next
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:06:44: Code: [Auswählen]
[ 0.217070] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.218368] TCP: Hash tables configured (established 131072 bind 65536) [ 0.218375] TCP reno registered [ 0.218562] NET: Registered protocol family 1 [ 0.218753] checking if image is initramfs... it is [ 0.716036] Switched to high resolution mode on CPU 0 [ 0.898574] Freeing initrd memory: 6428k freed [ 0.899728] audit: initializing netlink socket (disabled) [ 0.899751] type=2000 audit(1250606771.896:1): initialized [ 0.899977] highmem bounce pool size: 64 pages [ 0.899984] Total HugeTLB memory allocated, 0 [ 0.900100] VFS: Disk quotas dquot_6.5.1 [ 0.900148] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.900205] msgmni has been set to 1767 [ 0.900368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.900374] io scheduler noop registered [ 0.900377] io scheduler anticipatory registered [ 0.900380] io scheduler deadline registered [ 0.900392] io scheduler cfq registered (default) [ 0.932037] pci 0000:01:00.0: Boot video device [ 0.932552] isapnp: Scanning for PnP cards... [ 1.286227] isapnp: No Plug & Play device found [ 1.290078] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.290246] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.290824] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.293151] brd: module loaded [ 1.293292] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.293297] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.293470] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.293669] mice: PS/2 mouse device common for all mice [ 1.293848] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.293870] rtc0: alarms up to one year [ 1.293923] cpuidle: using governor ladder [ 1.293926] cpuidle: using governor menu [ 1.293935] No iBFT detected. [ 1.294704] TCP cubic registered [ 1.294710] NET: Registered protocol family 17 [ 1.294721] Using IPI No-Shortcut mode [ 1.294911] registered taskstats version 1 [ 1.295077] rtc_cmos 00:03: setting system clock to 2009-08-18 14:46:12 UTC (1250606772) [ 1.295490] Freeing unused kernel memory: 244k freed [ 1.343694] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.414018] Uniform Multi-Platform E-IDE driver [ 1.414029] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.415014] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.415034] Probing IDE interface ide0... [ 1.700159] hda: WDC WD800BB-55JKC0, ATA DISK drive [ 2.372094] Probing IDE interface ide1... [ 2.940095] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.940140] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.952550] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 2.952561] SIS5513: IDE controller (0x1039:0x5513 rev 0x00) at PCI slot 0000:00:02.5 [ 2.952570] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:02.5 [ 2.952574] SIS5513: can't reserve resources [ 2.952621] SIS_IDE: probe of 0000:00:02.5 failed with error -16 [ 2.973712] SCSI subsystem initialized [ 2.975401] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. [ 2.981882] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 2.989860] No dock devices found. [ 3.001787] libata version 3.00 loaded. [ 3.132600] Loading iSCSI transport class v2.0-869. [ 3.139276] iscsi: registered transport (tcp) [ 3.163840] device-mapper: uevent: version 1.0.3 [ 3.163973] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 3.173958] device-mapper: multipath: version 1.0.5 loaded [ 3.174770] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.182022] device-mapper: multipath emc: version 0.0.3 loaded [ 3.237734] md: multipath personality registered for level -4 [ 3.244756] md: faulty personality registered for level -5 [ 3.251986] md: raid0 personality registered for level 0 [ 3.260717] md: raid1 personality registered for level 1 [ 3.269214] md: raid10 personality registered for level 10 [ 3.276375] xor: automatically using best checksumming function: pIII_sse [ 3.296011] pIII_sse : 1346.000 MB/sec [ 3.296015] xor: using function: pIII_sse (1346.000 MB/sec) [ 3.297592] async_tx: api initialized (async) [ 3.368090] raid6: int32x1 587 MB/s [ 3.436027] raid6: int32x2 658 MB/s [ 3.504004] raid6: int32x4 525 MB/s [ 3.572148] raid6: int32x8 409 MB/s [ 3.640037] raid6: mmxx1 1250 MB/s [ 3.708026] raid6: mmxx2 2104 MB/s [ 3.776016] raid6: sse1x1 1131 MB/s [ 3.844024] raid6: sse1x2 1901 MB/s [ 3.844028] raid6: using algorithm sse1x2 (1901 MB/s) [ 3.844033] md: raid6 personality registered for level 6 [ 3.844036] md: raid5 personality registered for level 5 [ 3.844039] md: raid4 personality registered for level 4 [ 3.851274] md: linear personality registered for level -1 [ 3.869883] Driver 'sd' needs updating - please use bus_type methods [ 3.919171] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.926864] sis900.c: v1.08.10 Apr. 2 2006 [ 3.926948] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 3.927982] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 3.938306] 0000:00:04.0: Using transceiver found at address 1 as default [ 3.939457] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:13:8f:23:29:be [ 3.947272] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 3.947279] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.956066] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 3.956074] Copyright (c) 1999-2006 Intel Corporation. [ 3.964172] 8139too Fast Ethernet driver 0.9.28 [ 3.978547] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 3.988294] console [netcon0] enabled [ 3.988300] netconsole: network logging started [ 4.027642] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 4.027646] originally by Donald Becker <becker@scyld.com> [ 4.027648] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 4.058151] 3c503.c: Presently autoprobing (not recommended) for a single card. [ 4.066147] 3c503.c: No 3c503 card found (i/o = 0x0). [ 4.073506] 3c505.c: warning, using default DMA channel, [ 4.073513] 3c505.c: module autoprobe not recommended, give io=xx. [ 4.073524] 3c505.c: Failed to register card at 0x0. [ 4.131291] 3c515.c:v0.99t-ac 28-Oct-2002 becker@scyld.com and others [ 4.183649] ACPI: ACPI0007:00 is registered as cooling_device0 [ 4.535752] hda: max request size: 128KiB [ 4.558257] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 [ 4.558349] hda: cache flushes supported [ 4.558433] hda: hda1 hda2 [ 4.899250] usbcore: registered new interface driver usbfs [ 4.899301] usbcore: registered new interface driver hub [ 4.899350] usbcore: registered new device driver usb [ 4.901548] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.901620] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.901643] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 4.901842] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 4.901874] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfff9000 [ 4.958235] usb usb1: configuration #1 chosen from 1 choice [ 4.958282] hub 1-0:1.0: USB hub found [ 4.958297] hub 1-0:1.0: 3 ports detected [ 5.060291] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.060298] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.060302] usb usb1: Product: OHCI Host Controller [ 5.060305] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.060308] usb usb1: SerialNumber: 0000:00:03.0 [ 5.060373] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 5.060411] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 5.060453] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 5.060487] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffa000 [ 5.118487] usb usb2: configuration #1 chosen from 1 choice [ 5.118537] hub 2-0:1.0: USB hub found [ 5.118558] hub 2-0:1.0: 3 ports detected [ 5.220215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.220223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.220227] usb usb2: Product: OHCI Host Controller [ 5.220230] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.220233] usb usb2: SerialNumber: 0000:00:03.1 [ 5.220426] ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 23 [ 5.220451] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 5.220492] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 5.220549] PCI: cache line size of 64 is not supported by device 0000:00:03.2 [ 5.220574] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcfffb000 [ 5.232071] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.232224] usb usb3: configuration #1 chosen from 1 choice [ 5.232277] hub 3-0:1.0: USB hub found [ 5.232296] hub 3-0:1.0: 6 ports detected [ 5.336201] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.336208] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.336212] usb usb3: Product: EHCI Host Controller [ 5.336215] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 5.336218] usb usb3: SerialNumber: 0000:00:03.2 [ 5.427431] kjournald starting. Commit interval 5 seconds [ 5.427451] EXT3-fs: mounted filesystem with ordered data mode. [ 8.640009] udevd version 125 started [ 10.247433] Linux agpgart interface v0.103 [ 10.306780] agpgart: Detected SiS chipset - id:1857 [ 10.312021] agpgart: AGP aperture is 64M @ 0xd0000000 [ 10.322380] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 10.349867] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.364298] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.633016] input: Power Button (FF) as /class/input/input1 [ 10.658972] ACPI: Power Button (FF) [PWRF] [ 10.659085] input: Power Button (CM) as /class/input/input2 [ 10.686838] ACPI: Power Button (CM) [PWRB] [ 11.298290] input: PC Speaker as /class/input/input3 [ 11.524892] Error: Driver 'pcspkr' is already registered, aborting... [ 12.886035] Adding 2000052k swap on /dev/hda1. Priority:-1 extents:1 across:2000052k [ 13.368789] EXT3 FS on hda2, internal journal [ 13.876664] loop: module loaded [ 14.227252] kjournald starting. Commit interval 5 seconds [ 14.227306] EXT3 FS on loop0, internal journal [ 14.227313] EXT3-fs: mounted filesystem with ordered data mode. [ 17.621027] eth0: Media Link On 100mbps full-duplex [ 20.798275] NET: Registered protocol family 10 [ 20.799008] lo: Disabled Privacy Extensions [ 31.040028] eth0: no IPv6 routers present

Und immer noch keine Resource für SIS5513
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:07:17: Ja dann haben noch einen:

kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hda2 ro acpi=off lapic quiet

Code: [Auswählen]
dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14 01:27:18 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003dff8000 - 000000003e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] 95MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00fbc70] 000fbc70 [ 0.000000] Entering add_active_range(0, 0, 253936) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 253936 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 253936 [ 0.000000] On node 0 totalpages: 253936 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 192 pages used for memmap [ 0.000000] HighMem zone: 24368 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: SiS Product ID: 741 <6>MPTABLE: Product ID: 741 <6>MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 1 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:c0c00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251952 [ 0.000000] Kernel command line: root=/dev/hda2 ro acpi=off lapic quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1505.207 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 996672k/1015744k available (1769k kernel code, 18468k reserved, 751k data, 244k init, 98240k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba663 - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba663 (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084170] Calibrating delay using timer specific routine.. 3012.77 BogoMIPS (lpj=6025544) [ 0.084228] Security Framework initialized [ 0.084239] SELinux: Disabled at boot. [ 0.084245] Capability LSM initialized [ 0.084269] Mount-cache hash table entries: 512 [ 0.084523] Initializing cgroup subsys ns [ 0.084529] Initializing cgroup subsys cpuacct [ 0.084533] Initializing cgroup subsys devices [ 0.084563] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084567] CPU: L2 Cache: 256K (64 bytes/line) [ 0.084574] Intel machine check architecture supported. [ 0.084578] Intel machine check reporting enabled on CPU#0. [ 0.084602] Checking 'hlt' instruction... OK. [ 0.100412] SMP alternatives: switching to UP code [ 0.108726] Freeing SMP alternatives: 16k freed [ 0.108894] ExtINT not setup in hardware but reported by MP table [ 0.108961] ENABLING IO-APIC IRQs [ 0.109161] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.148859] CPU0: AMD Sempron(tm) 2200+ stepping 00 [ 0.260016] Brought up 1 CPUs [ 0.260016] Total of 1 processors activated (3012.77 BogoMIPS). [ 0.260016] CPU0 attaching sched-domain: [ 0.260016] domain 0: span 0 [ 0.260016] groups: 0 [ 0.260016] net_namespace: 660 bytes [ 0.260016] Booting paravirtualized kernel on bare hardware [ 0.260016] NET: Registered protocol family 16 [ 0.260016] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 [ 0.260016] PCI: Using configuration type 1 for base access [ 0.260016] Setting up standard PCI resources [ 0.260591] ACPI: Interpreter disabled. [ 0.260598] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.260647] pnp: PnP ACPI: disabled [ 0.260653] PnPBIOS: Scanning system for PnP BIOS support... [ 0.260690] PnPBIOS: Found PnP BIOS installation structure at 0xc00f78e0 [ 0.260695] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x65ab, dseg 0xf0000 [ 0.261420] PnPBIOS: 10 nodes reported by PnP BIOS; 10 recorded by driver [ 0.261815] PCI: Probing PCI hardware [ 0.261820] PCI: Probing PCI hardware (bus 00) [ 0.262045] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.263267] PCI: Using IRQ router SIS [1039/0963] at 0000:00:02.0 [ 0.263289] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 16 [ 0.263296] PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 20 [ 0.263301] PCI->APIC IRQ transform: 0000:00:03.1[B] -> IRQ 21 [ 0.263306] PCI->APIC IRQ transform: 0000:00:03.2[D] -> IRQ 23 [ 0.263312] PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 19 [ 0.263316] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 [ 0.263709] system 00:01: iomem range 0x0-0x9fbff could not be reserved [ 0.263714] system 00:01: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.263719] system 00:01: iomem range 0xf0000-0xfffff could not be reserved [ 0.263723] system 00:01: iomem range 0x100000-0x3dfeffff could not be reserved [ 0.263728] system 00:01: iomem range 0x3dff0000-0x3dff7fff could not be reserved [ 0.263732] system 00:01: iomem range 0x3dff8000-0x3dffffff could not be reserved [ 0.263737] system 00:01: iomem range 0xffee0000-0xffefffff could not be reserved [ 0.263741] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.263746] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.263750] system 00:01: iomem range 0xfffc0000-0xffffffff could not be reserved [ 0.264360] PCI: Bridge: 0000:00:01.0 [ 0.264365] IO window: c000-cfff [ 0.264372] MEM window: 0xcfd00000-0xcfefffff [ 0.264378] PREFETCH window: 0x00000000bfa00000-0x00000000cfbfffff [ 0.264420] NET: Registered protocol family 2 [ 0.264557] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.265064] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.267686] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.268982] TCP: Hash tables configured (established 131072 bind 65536) [ 0.268989] TCP reno registered [ 0.269183] NET: Registered protocol family 1 [ 0.269373] checking if image is initramfs... it is [ 0.949688] Freeing initrd memory: 6428k freed [ 0.950766] audit: initializing netlink socket (disabled) [ 0.950789] type=2000 audit(1250606963.948:1): initialized [ 0.951011] highmem bounce pool size: 64 pages [ 0.951018] Total HugeTLB memory allocated, 0 [ 0.951113] VFS: Disk quotas dquot_6.5.1 [ 0.951161] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.951218] msgmni has been set to 1767 [ 0.951373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:09:45: Code: [Auswählen]
[ 0.951379] io scheduler noop registered [ 0.951382] io scheduler anticipatory registered [ 0.951385] io scheduler deadline registered [ 0.951397] io scheduler cfq registered (default) [ 0.980077] pci 0000:01:00.0: Boot video device [ 0.980505] isapnp: Scanning for PnP cards... [ 1.334207] isapnp: No Plug & Play device found [ 1.337736] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.337898] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.338490] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.340669] brd: module loaded [ 1.340804] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 [ 1.340809] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.340976] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.341164] mice: PS/2 mouse device common for all mice [ 1.341337] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.341360] rtc0: alarms up to one day [ 1.341409] cpuidle: using governor ladder [ 1.341412] cpuidle: using governor menu [ 1.341420] No iBFT detected. [ 1.342162] TCP cubic registered [ 1.342168] NET: Registered protocol family 17 [ 1.342178] Using IPI No-Shortcut mode [ 1.342355] registered taskstats version 1 [ 1.342511] rtc_cmos 00:05: setting system clock to 2009-08-18 14:49:24 UTC (1250606964) [ 1.342930] Freeing unused kernel memory: 244k freed [ 1.391087] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.461430] Uniform Multi-Platform E-IDE driver [ 1.461442] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.462415] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.462436] Probing IDE interface ide0... [ 1.748246] hda: WDC WD800BB-55JKC0, ATA DISK drive [ 2.420206] Probing IDE interface ide1... [ 2.988244] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.988289] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.000602] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller [ 3.000611] SIS5513: IDE controller (0x1039:0x5513 rev 0x00) at PCI slot 0000:00:02.5 [ 3.000621] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:02.5 [ 3.000625] SIS5513: can't reserve resources [ 3.000671] SIS_IDE: probe of 0000:00:02.5 failed with error -16 [ 3.021558] SCSI subsystem initialized [ 3.023242] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. [ 3.029713] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 3.049438] libata version 3.00 loaded. [ 3.179431] Loading iSCSI transport class v2.0-869. [ 3.186235] iscsi: registered transport (tcp) [ 3.210525] device-mapper: uevent: version 1.0.3 [ 3.210640] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 3.220672] device-mapper: multipath: version 1.0.5 loaded [ 3.221480] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.228699] device-mapper: multipath emc: version 0.0.3 loaded [ 3.284008] md: multipath personality registered for level -4 [ 3.291017] md: faulty personality registered for level -5 [ 3.298348] md: raid0 personality registered for level 0 [ 3.306903] md: raid1 personality registered for level 1 [ 3.315388] md: raid10 personality registered for level 10 [ 3.322531] xor: automatically using best checksumming function: pIII_sse [ 3.340187] pIII_sse : 1424.000 MB/sec [ 3.340191] xor: using function: pIII_sse (1424.000 MB/sec) [ 3.341759] async_tx: api initialized (async) [ 3.412228] raid6: int32x1 583 MB/s [ 3.480266] raid6: int32x2 661 MB/s [ 3.548274] raid6: int32x4 527 MB/s [ 3.616215] raid6: int32x8 410 MB/s [ 3.684236] raid6: mmxx1 1252 MB/s [ 3.752202] raid6: mmxx2 2095 MB/s [ 3.820253] raid6: sse1x1 1128 MB/s [ 3.888230] raid6: sse1x2 1900 MB/s [ 3.888233] raid6: using algorithm sse1x2 (1900 MB/s) [ 3.888238] md: raid6 personality registered for level 6 [ 3.888242] md: raid5 personality registered for level 5 [ 3.888245] md: raid4 personality registered for level 4 [ 3.895449] md: linear personality registered for level -1 [ 3.913970] Driver 'sd' needs updating - please use bus_type methods [ 3.963048] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.970642] sis900.c: v1.08.10 Apr. 2 2006 [ 3.971736] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 3.982062] 0000:00:04.0: Using transceiver found at address 1 as default [ 3.983217] eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:13:8f:23:29:be [ 3.990950] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 3.990957] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.999648] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 3.999655] Copyright (c) 1999-2006 Intel Corporation. [ 4.007640] 8139too Fast Ethernet driver 0.9.28 [ 4.022085] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 4.031776] console [netcon0] enabled [ 4.031782] netconsole: network logging started [ 4.070900] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 4.070905] originally by Donald Becker <becker@scyld.com> [ 4.070907] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 4.101313] 3c503.c: Presently autoprobing (not recommended) for a single card. [ 4.109306] 3c503.c: No 3c503 card found (i/o = 0x0). [ 4.116575] 3c505.c: warning, using default DMA channel, [ 4.116582] 3c505.c: module autoprobe not recommended, give io=xx. [ 4.116593] 3c505.c: Failed to register card at 0x0. [ 4.174153] 3c515.c:v0.99t-ac 28-Oct-2002 becker@scyld.com and others [ 4.228514] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 4.568451] hda: max request size: 128KiB [ 4.576281] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 [ 4.576970] hda: cache flushes supported [ 4.577056] hda: hda1 hda2 [ 4.703620] usbcore: registered new interface driver usbfs [ 4.703668] usbcore: registered new interface driver hub [ 4.703731] usbcore: registered new device driver usb [ 4.707080] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.707163] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 4.707332] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 4.707361] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfff9000 [ 4.762447] usb usb1: configuration #1 chosen from 1 choice [ 4.762501] hub 1-0:1.0: USB hub found [ 4.762519] hub 1-0:1.0: 3 ports detected [ 4.864503] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.864511] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.864515] usb usb1: Product: OHCI Host Controller [ 4.864517] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 4.864520] usb usb1: SerialNumber: 0000:00:03.0 [ 4.864601] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 4.864640] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 4.864671] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffa000 [ 4.923445] usb usb2: configuration #1 chosen from 1 choice [ 4.923495] hub 2-0:1.0: USB hub found [ 4.923515] hub 2-0:1.0: 3 ports detected [ 5.024585] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.024592] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.024596] usb usb2: Product: OHCI Host Controller [ 5.024599] usb usb2: Manufacturer: Linux 2.6.26-2-686 ohci_hcd [ 5.024602] usb usb2: SerialNumber: 0000:00:03.1 [ 5.024751] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 5.024796] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 5.024851] PCI: cache line size of 64 is not supported by device 0000:00:03.2 [ 5.024868] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcfffb000 [ 5.036406] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.036554] usb usb3: configuration #1 chosen from 1 choice [ 5.036602] hub 3-0:1.0: USB hub found [ 5.036621] hub 3-0:1.0: 6 ports detected [ 5.140507] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.140514] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.140518] usb usb3: Product: EHCI Host Controller [ 5.140521] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 5.140524] usb usb3: SerialNumber: 0000:00:03.2 [ 5.256990] kjournald starting. Commit interval 5 seconds [ 5.257008] EXT3-fs: mounted filesystem with ordered data mode. [ 8.461911] udevd version 125 started [ 9.853083] Linux agpgart interface v0.103 [ 9.878075] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 9.892533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.900411] agpgart: Detected SiS chipset - id:1857 [ 9.905622] agpgart: AGP aperture is 64M @ 0xd0000000 [ 10.027121] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 10.469832] input: PC Speaker as /class/input/input1 [ 10.634006] Error: Driver 'pcspkr' is already registered, aborting... [ 11.784567] Adding 2000052k swap on /dev/hda1. Priority:-1 extents:1 across:2000052k [ 12.248667] EXT3 FS on hda2, internal journal [ 12.606498] loop: module loaded [ 12.948849] kjournald starting. Commit interval 5 seconds [ 12.948899] EXT3 FS on loop0, internal journal [ 12.948906] EXT3-fs: mounted filesystem with ordered data mode. [ 16.345869] eth0: Media Link On 100mbps full-duplex [ 19.411687] NET: Registered protocol family 10 [ 19.412384] lo: Disabled Privacy Extensions [ 30.318621] eth0: no IPv6 routers present

Also nichts hilft es bleibt beim nicht aktivieren des SIS5513..

Beim Versuch den Generic IDE aus dem Kernel zu verbannen (selber backen), startet der Rechner nicht...

Es bleibt dabei kein DMA

hdparm -d 1 /dev/hda

/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)

und ne unheimlich lahme Platte die fast stehen bleibt...

hdparm -tT /dev/hda

/dev/hda:
Timing cached reads: 308 MB in 2.09 seconds = 147.70 MB/sec
Timing buffered disk reads: 10 MB in 3.52 seconds = 2.84 MB/sec

Gruß

Ralf

Sorry das Forum hat ne Limitierung für 20000 Zeichen.. Komplette Eintrag nochmal als Anhang...
Titel: Re: Festplatte sehr langsam?
Beitrag von: timo am 18.August 2009, 17:25:09: Hallo,

danke für die umfangreichen Informationen. Eine Kombination hatten Sie AFAIK noch nicht genutzt:

acpi=off noapic nolapic

Würden Sie dies bitte noch durchführen ?

Danke Timo
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 18.August 2009, 17:49:39: OK no Problem..

kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hda2 ro acpi=off noapic nolapic quiet

Im Anhang die dmesg.txt...

Aber wieder nix...

Gruß

Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: timo am 18.August 2009, 18:53:17: Hallo,

danke. Ich gebs mal weiter, das die Kollegen vor Ort sich das genauer anschauen.

Gruß Timo,
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 19.August 2009, 01:06:42: Noch ein kleiner Hinweis...

Habe gerade mal Ubuntu 8.04 LTS [Hardy Heron] 32Bit - Minimal installiert wollte nur mal schauen wie es da aussieht...

also genau das selbe:

[ 42.780283] pata_sis 0000:00:02.5: version 0.5.2
[ 42.780383] PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:02.5
[ 42.780441] pata_sis 0000:00:02.5: failed to request/iomap BARs for port 0 (errno=-16)

Fehler im SIS Treiber....

sudo hdparm -tT /dev/hda

/dev/hda:
Timing cached reads: 442 MB in 2.00 seconds = 221.50 MB/sec
Timing buffered disk reads: 12 MB in 3.10 seconds = 3.87 MB/sec

sudo hdparm -d1 /dev/hda

/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)

Naja probier gleich nochmal mit openSuse 11.x

Gruß
Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 19.August 2009, 01:33:07: So jetzt habe ich OpenSuse 11.1 32bit - Minimal drauf....

Und da funktioniert es!!!

kernel /boot/vmlinuz-2.6.27.7-9-pae root=/dev/hda2 showopts acpi=off noapic

Uniform Multi-Platform E-IDE driver
sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x00)
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07
ide1: BM-DMA at 0xff08-0xff0f
Probing IDE interface ide0...

sudo hdparm -d1 /dev/hda

/dev/hda:
setting using_dma to 1 (on)
using_dma = 1 (on)

sudo hdparm -W1 /dev/hda

/dev/hda:
setting drive write-caching to 1 (on)
write-caching = 1 (on)

sudo hdparm -c1 /dev/hda

/dev/hda:
setting 32-bit IO_support flag to 1
IO_support = 1 (32-bit)

sudo hdparm -tT /dev/hda

/dev/hda:
Timing cached reads: 530 MB in 2.00 seconds = 264.80 MB/sec
Timing buffered disk reads: 168 MB in 3.01 seconds = 55.73 MB/sec

3 MB zu 55 MB ist doch ein kleiner Feiner Unterschied....

Gruß

Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 19.August 2009, 15:02:20: Dann werde ich jetzt auch Suse installieren!
Eigentlich habe ich ja auch Debian gehofft... Schade das es damit anscheinend nicht klappt...
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 19.August 2009, 15:03:57: Sollte doch wohl für EuServ lösbar sein oder???

Hardware ist es ja nicht beweist ja der test mit openSuse....

Gruß

Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: cmdLine am 19.August 2009, 15:15:22: Seh ich das richtig, dass Suse den 2.6.27er Kernel nutzt und Debian 2.6.26? Von 2.6.26->2.6.27-rc1 gab es afaik Änderungen am SIS5513-Treiber. Eventl. liegt es daran...

Zitat
commit 1ceb906b4062954e92295191402e9214345ee0e9
Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu Jul 24 22:53:25 2008 +0200

sis5513: add ->remove method and module_exit()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 19.August 2009, 15:31:26: Das siehst Du richtig ...

SUse benutzt neueren Kernel...

Gruß
Ralf

OK ich backe mal den neusten Kernel....
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 19.August 2009, 16:54:10: Ich habe von Euserv soebend eine E-Mail bekommen:

Code: [Auswählen]
Sehr geehrte(r) Herr Sebastian Buhr, Vielen Dank für Ihre Nachricht. Wie im entsprechendem Forumsthread angekündigt, wurde auch Ihr Server geprüft, es wurden im Bios einige Werte auf eine optimalere Konfiguration geändert. Nach Abschluss der Arbeiten wurde der Status nochmals per RescueSystem geprüft: #hdparm -v /dev/hda /dev/hda: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 16383/255/63, sectors = 156301488, start = 0 #hdparm -tT /dev/hda /dev/hda: Timing cached reads: 472 MB in 2.01 seconds = 235.26 MB/sec Timing buffered disk reads: 150 MB in 3.02 seconds = 49.67 MB/sec
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 19.August 2009, 17:24:17: Nun wollte ich ebend Debian 5.0 Minimal reinstallieren und DMA-Modus Aktivieren...
Funktioniert leider wieder nicht!

Frage mich gerade wie Euserv das gemacht hat...
Sie schreiben ja das Bioseinstellungen vorgenommen wurden...
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 19.August 2009, 18:23:41: So liegt also ganz klar am Kernel...

Habe nun denn 2.6.30.5 auf der Kiste gebacken. Config vom orginal Kernel genommen...

Und schaue da es funtzt.....

Code: [Auswählen]
[ 1.054032] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.066720] sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller [ 1.066730] sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x00) [ 1.066771] sis5513 0000:00:02.5: not 100% native mode: will probe irqs later [ 1.066782] ide0: BM-DMA at 0xff00-0xff07 [ 1.066799] ide1: BM-DMA at 0xff08-0xff0f [ 1.066809] Probing IDE interface ide0... [ 1.352162] hda: WDC WD800BB-55JKC0, ATA DISK drive [ 2.024144] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.024227] hda: UDMA/100 mode selected [ 2.024285] Probing IDE interface ide1... [ 2.592112] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.604714] ide1 at 0x170-0x177,0x376 on irq 15
und siehe da!!!

hdparm -v /dev/hda

/dev/hda:
multcount = 16 (on)
IO_support = 0 (default)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 156301488, start = 0
srv17:~# sudo hdparm -tT /dev/hda
-bash: sudo: command not found
srv17:~# hdparm -tT /dev/hda

/dev/hda:
Timing cached reads: 492 MB in 2.00 seconds = 245.94 MB/sec
Timing buffered disk reads: 168 MB in 3.01 seconds = 55.86 MB/sec

55,86 MB/Sec mit Debian ......

Gruß

Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 19.August 2009, 18:29:48: Kannst du mir erklären wie ich deinen Kernel auf meine Kiste installiere?
Ich möchte meinen Server auch entlich benutzen :(
Titel: Re: Festplatte sehr langsam?
Beitrag von: Ralf am 19.August 2009, 22:38:40: Anleitungen gibts genug im Netz.. Ich habe mal ein wenig Google beansprucht... Und denke die einfachste Anleitung ist diese...

http://hihn.org/2008/12/eigenen-kernel-unter-debian-lenny-kompilieren/ (http://hihn.org/2008/12/eigenen-kernel-unter-debian-lenny-kompilieren/)

Gruß

Ralf
Titel: Re: Festplatte sehr langsam?
Beitrag von: Voyeur am 21.August 2009, 15:02:00: ES FUNKTIONIERT!
Jawoll!

Ich bin zufrieden ;)
Titel: 100Mbit/s flat oder nicht?
Beitrag von: jaypinelli am 30.September 2009, 21:19:33: Hallo Freunde.
Erst mal nen schönen juten Tach aus dem Rheinland in die Runde..

Dann folgendes.....
Habe folgenden Server:
https://ssl.euserv.de/produkte/server/misurfi_m_2009.php?sess_id=9abdaccf96421240c3cb13dde0a5a9eb

Debian 5 Lenny mit sycp p ostfix dovecot proftpd etc....
Läuft alles ohne Probs.
Nur fällt mir auf, das beim Up/Downloaden per FTP eine BB vom ca 68 bis 72 Kbit/sec ( Upload ) und ca 120 bis 170 Kbit/s beim Download als Geschwindigkeit im proftpd angezeigt wird.
Das entspricht doch eigendlich 10Mbit/s oder liege ich da falsch?
Sind die Server nicht mit 100Mbit/s angebunden, wie im Angebot beschrieben, sondern auf 10Mbit "gedrosselt" ??
Das entspräche ja dann nicht der Angebotsbeschreibung.
Wäre allerdings Schade, weil man da ja dann seine Konsequenzen drauß ziehen könnte.....
Titel: Re: 100Mbit/s flat oder nicht?
Beitrag von: Forum-Support2 am 01.Oktober 2009, 08:03:03: Hallo,

Misurfi M hat eine 100Mbit Verbindung ohne Bandbreitenzusicherung, gedrosselt wird nichts. Die von Ihnen genannten Bandbreiten sind jedoch sehr gering. Beim Misurfi sollten Bandbreiten >10Mbit problemlos im Peak möglich sein. Relevant sind jedoch ausschliesslich Messung ohne Websoftware, d.h. wget.

Da Sie Debian nutzen, sollten Sie ein wget euserv.de/100mb.nul machen, wenn die Bandbreite beim Download nicht besser ist, sollten Sie sich http://forum.euserv.de/index.php?topic=4135.0 , da Debian-Bug.

Sollte das auch nicht helfen, starten Sie Ihren Server im Rescue-Mode und machen das Ganze noch einmal.

Wenn das auch nicht hilft, bitte Mail an den Support.

viele Grüße,
Thomas
Titel: Re: 100Mbit/s flat oder nicht?
Beitrag von: jaypinelli am 03.Oktober 2009, 12:53:52: Danke für die Antwort und den Link.

Ich habe also die Ratschläge im Link befolgt,mir nen eigenen Kernel auf Basis 2.6.31.1 gebacken,und siehe da, der Durchsatz der FP ist von 2-4 M/s auf 57 gestiegen.
Vorher war DMA nicht aktiviert und auch nicht dazu zu kriegen,jedenfalls mit dem Standartkernel aus eurem Image:

91-143-83-xxx:~# hdparm /dev/???

/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 19457/255/63, sectors = 312581808, start = 0

91-143-83-xxx:~# hdparm -tT /dev/???

/dev/hda:
Timing cached reads: 966 MB in 2.00 seconds = 483.03 MB/sec
Timing buffered disk reads: 174 MB in 3.02 seconds = 57.52 MB/sec

Die Wget Sache hingegen dümpelt trotzallem mit 11,4 M/sec vor sich hin.
Da scheint also was an der Netzwerkanbinung des Servers nicht zu stimmen,oder?
Titel: Re: 100Mbit/s flat oder nicht?
Beitrag von: dominusnoctae am 03.Oktober 2009, 12:57:17: ähm... 11,4 M = 11,4MB/s *8 = 91,2 Mbit/s ...also ein durchaus ordendlicher Wert...
Titel: Re: 100Mbit/s flat oder nicht?
Beitrag von: jaypinelli am 03.Oktober 2009, 13:51:09: sorry...sollte kbit/sec heißen....
Titel: Re: 100Mbit/s flat oder nicht?
Beitrag von: Forum-Support2 am 03.Oktober 2009, 14:14:22: Hallo,

Bitte posten Sie wie bereits geschrieben die komplette Ausgabe von:

Zitat
wget euserv.de/100mb.nul

im normalen Modus und im Rescue - Mode.

viele Grüße,
Thomas
Titel: Re: Festplatte sehr langsam / Debian DMA-Problem
Beitrag von: GThreepwood am 03.Oktober 2009, 21:08:09: vielleicht kannst du das Testfile ja auch zum Test mal auf deinem Server bereitstellen damit das heruntergeladen werden kann. Gibt ja genug Leute hier die ihre Ergebnisse gern mit dir teilen wollen.

Die Lösung findet sich so bestimmt noch schneller.

Wie sind denn deine wget-Ausgaben? Wären sicherlich interessanter als das Crossposting gewesen
Titel: Re: Festplatte sehr langsam / Debian DMA-Problem
Beitrag von: jaypinelli am 04.Oktober 2009, 16:06:13: Hier isse.
Hab gerade nochmals gewegettet im normalmodus.
Nun haben sich die kb/s im M/s verändert.Also scheint was passiert zu sein.
Aber per FTP oder http nur ca 140KB/sec
Downloadlink der Datei:
http://board-universe.net/100mb.nul
Testet selber.

Zitat
91-143-83-207:~# wget euserv.de/100mb.nul --no-check-certificate
--2009-10-04 14:41:02-- http://euserv.de/100mb.nul
Resolving euserv.de... 85.31.185.122
Connecting to euserv.de|85.31.185.122|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://ssl.euserv.de/100mb.nul [following]
--2009-10-04 14:41:02-- https://ssl.euserv.de/100mb.nul
Resolving ssl.euserv.de... 85.31.185.122
Connecting to ssl.euserv.de|85.31.185.122|:443... connected.
WARNING: cannot verify ssl.euserv.de's certificate, issued by `/C=US/ST=UT/L=Salt Lake City/O=The USERTRUST Network/OU=http://www.usertrust.com/CN=UTN-USERFirst-Hardware':
Unable to locally verify the issuer's authority.
HTTP request sent, awaiting response... 200 OK
Length: 104857600 (100M) [text/plain]
Saving to: `100mb.nul.1'

100%[====================================================================================================================>] 104,857,600 11.2M/s in 8.9s

2009-10-04 14:41:11 (11.2 MB/s) - `100mb.nul.1' saved [104857600/104857600]
Titel: Re: Festplatte sehr langsam / Debian DMA-Problem
Beitrag von: dominusnoctae am 04.Oktober 2009, 16:16:20: du erreichst 11,2MB/s das ist ein guter Wert... auch wenn ich die datei bei dir ziehe sind die werte ok.. und ich habe nun nicht den vServer hier von Netcup genutzt sondern meinen produktiven der in nem anderen RZ steht...

Zitat
# wget http://board-universe.net/100mb.nul
--2009-10-04 16:12:36-- http://board-universe.net/100mb.nul
Auflösen des Hostnamen »board-universe.net«.... 91.143.83.207
Verbindungsaufbau zu board-universe.net|91.143.83.207|:80... verbunden.
HTTP Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 104857600 (100M) [text/plain]
In »100mb.nul« speichern.

100%[=======================>] 104.857.600 10,4M/s in 11s

2009-10-04 16:12:47 (9,27 MB/s) - »100mb.nul« gespeichert [104857600/104857600]
Titel: Re: Festplatte sehr langsam / Debian DMA-Problem
Beitrag von: jaypinelli am 04.Oktober 2009, 16:32:20: Gut.Scheinbar ist die Serveranbindung wohl ok.....
Dann hab ich wohl irgendwo ein Konfigurationsproblem.
Wenn ich die Datei per Http ( durch einfaches anklicken des Linkes ) oder Ftp Programm ( per einloggen auf den jeweiligen user Account ) vom Server ziehe, kommen max.140 KB/s DL und knapp die Hälfte beim Upload zum tragen.
Titel: Re: Festplatte sehr langsam / Debian DMA-Problem
Beitrag von: jaypinelli am 07.Oktober 2009, 10:29:25: Es hat sich was getan.
Komischerweise erreiche ich jetzt per FTP oder HTTP download um die 660 KB/sec, was meinem DSL Anschluss von 6k entspricht.Nur der Upload per FTP läuft mit ca 70 KB/sec
Geändert hatte ich am Server nichts, auch kein Neustart.
Bin nun überfragt, woran das gelegen haben könnte....
Naja..kann man mit Leben....
Titel: Re: Festplatte sehr langsam / Debian DMA-Problem
Beitrag von: Loader009 am 09.Februar 2010, 14:53:21: Dein Upload entspricht dem von DSL6k.
Desweiteren hast du nie den maximalen Download, wenn du währenddessen auch noch Uploadest.
Mit Speedtest.net kannst du ganz gut deine eigene Bandbreite testen.
Greetz